3102-69 – Flange Yokes – 1310 Series – Bolt Circle Dia 3.750″ – Bolt Hole Dia 0.475″,

The 3102-69 flange yoke mounts to the companion flange or axle housing and carries the driveshaft end u-joint. It's not a universal part — the bolt circle, pilot diameter, and series are all specific. Vibration that tracks with vehicle speed and stays consistent under load often starts right here, at a worn or mis-seated flange yoke. The 3102-69 flange yoke is the correct replacement.

3102-69 Flange Yoke — 1310 Series Specifications & Fitment

The 1310 series covers light-duty trucks — F-150, Silverado 1500, Jeep Wrangler, Ram 1500. The 3102-69 flange yoke specs: 3.750 bolt circle | 1.968 pilot | 4x0.475 bolt holes | 1.750" CJ-to-flat. Pilot diameter is what centers the yoke on the companion flange — that dimension must match exactly or the driveshaft will run off-center at speed. Bolt circle determines your hole pattern match.

Before ordering the 3102-69 flange yoke, measure your diff flange bolt circle and pilot diameter directly. Don't rely on series designation alone — after an axle swap, the flange dimensions may differ from the original factory spec. Brand: UDS. Verify, then order.

Key Features

• Series: 1310 — built for light-duty trucks — F-150, Silverado 1500, Jeep Wrangler, Ram 1500
• Bolt circle: 3.750 — must match axle/diff flange hole pattern exactly
• Pilot dia: 1.968 — centers yoke on companion flange, no play allowed
• 4 bolt holes at 0.475 — verify hole count and size
• CJ-to-flat: 1.750" — affects driveshaft working angle clearance
• Brand: UDS — direct-fit replacement

Specifications

• SKU: 3102-69
• Brand: UDS
• Series: 1310
• Bolt Circle: 3.750
• Pilot Dia: 1.968
• Bolt Holes: 4
• Bolt Hole Dia: 0.475
• CJ to Flat: 1.750"