TTV01-003 – Rubber Flex Disc – Bolt Circle Dia 96MM – Disc Width 35MM – Bolt Hole Dia 10

TTV01-003 is a critical component for any driveline setup, acting as a rubber flex disc that absorbs torsional vibrations between the transmission output and driveshaft input. With a bolt circle diameter of 96MM and a disc width of 35MM, it fits seamlessly into applications requiring a dampener with flex disc functionality.

Before installation, ensure you check the bolt hole count of 6 and the bolt hole diameter of 10MM. A common mistake during installation is misaligning the bolt orientation; always verify the alignment arrows on the disc. This flex disc compensates for minor angular misalignment, which can save you from unnecessary wear on other driveline components.

When you torque the bolts, do so in a star pattern to evenly distribute the load and avoid any potential cracking or deformation. After installation, inspect the flex disc for any visible signs of wear, such as cracking or deformation, which can lead to symptoms like clunking on takeoff or vibrations at low speeds.

• Check bolt orientation and alignment arrows before installation.
• Torque bolts to specification in a star pattern.
• Inspect for cracks at reinforcement sleeves post-installation.
• Monitor for symptoms like clunking or vibrations after installation.

Using the TTV01-003 flex disc enhances the overall stability and comfort of your vehicle by significantly reducing noise, vibration, and harshness (NVH) in the cabin. This part is essential for maintaining the integrity of your driveline system.