T2-3-6041HP – Transmission Yokes – 1330 Series – 30/31 X 1.391 Splines – 1.685″ Hub Dia

The T2-3-6041HP transmission yoke is the connection between the gearbox tailshaft and the front of the driveshaft. It splines onto the transmission output shaft and carries the front u-joint of the driveshaft. For 1330 series applications, the spline count and hub diameter are the two specs that determine whether this part fits your tailshaft correctly.

T2-3-6041Hp Transmission Yoke — 1330 Series Specs & Tailshaft Fit

The 1330 series covers light-to-medium duty trucks and GM half-ton platforms. The T2-3-6041HP transmission yoke specs: 30/31 X 1.391 spline | 1.685" hub | 6.000" CJ-to-end. Compatible with: C6 / Forged Steel / Black Oxidized / CHROMOLY. Hub diameter determines engagement depth on the tailshaft — if the hub is too short, the splines don't fully engage. CJ-to-end affects driveshaft working length.

After a transmission rebuild or swap, confirm the tailshaft spline count hasn't changed before installing the T2-3-6041HP transmission yoke. Not all 1330 series transmissions use the same output spline across all years and configurations. Count the splines on the actual shaft.

Key Features

• Series: 1330 — light-to-medium duty trucks and GM half-ton platforms
• Spline: 30/31 X 1.391 — must match transmission tailshaft
• Hub dia: 1.685" — determines spline engagement depth
• CJ-to-end: 6.000" — affects driveshaft working length
• Compatible with: C6 / Forged Steel / Black Oxidized / CHROMOLY
• Brand: UDS

Specifications

• SKU: T2-3-6041HP
• Brand: UDS
• Series: 1330
• Spline: 30/31 X 1.391
• Hub Dia: 1.685"
• CJ to End: 6.000"
• Notes: C6 / Forged Steel / Black Oxidized / CHROMOLY