Description
SPL140X — SPL140 series, 1.938″ cap, 5.461″ width. Premium greaseable universal joint. Verify cap dia and snap ring style before ordering.
The spl140x is a SPL140 series -- SPL140 -- extreme performance application SPRTAB retention universal joint measuring 1.938" cap dia | 5.461" width. The spl140x is greaseable with zerk fitting. Every spl140x is verified for cap diameter, bearing width, and snap ring groove dimensions before it ships from Universal Driveshafts.
SPL140X -- SPL140 Series Cap & Width Specifications
The this component specs: 1.938" cap dia | 5.461" width. Cap diameter determines which yoke bore it fits -- the cap must seat fully into the yoke without play. Bearing width (5.461" across the body) controls the span between yoke ears. A cross that is too wide won't fit; too narrow and the snap rings don't seat in the groove.
Verify the yoke bore diameter against the this u-joint cap size before installing. The snap ring style (SPRTAB retention) must match the yoke groove pattern -- OSR yokes have an external groove; ISR yokes have an internal groove. The it requires a grease gun at installation and at regular service intervals. Correct installation torque on the strap kit or U-bolt is critical -- undertorqued straps allow the cap to walk under load.
Installation Notes for this unit
Before installing the the assembly, clean the yoke bores of any rust, burrs, or old bearing material. The bearing cups must drop in by hand -- never drive them in with a hammer directly on the cup. Use a proper cross-and-bearing installation tool or a press. Driving a cup in at an angle cocks the needle bearings and destroys the this u-joint before it ever sees load.
After installation, verify full rotation without binding. A binding cross indicates a cup is cocked or seated too deep. The it should articulate freely through the full operating angle of your driveshaft before the vehicle is lowered off the lift.
Key Features
- Series: SPL140 series -- SPL140 -- extreme performance application
- Cap dia: 1.938" -- must match yoke bore exactly
- Width: 5.461" -- controls yoke ear span
- Style: SPRTAB retention -- verify yoke groove type before ordering
- Greaseable -- zerk fitting included, service at regular intervals
- Part number: The partU
- Brand: UDS
Specifications
- SKU: This componentU
- Part Number: This u-jointU
- Brand: UDS
- Series: SPL140
- Cap Dia 1: 1.938"
- Width 1: 5.461"
- Snap Ring Style: SPRTAB
- Lube: Yes -- grease fitting
| Brand |
UDS |
|---|---|
| Cap dia 1 |
1.938 |
| Lube |
Y |
| Partn number |
SPL140XU |
| Series |
SPL140 |
| Style |
SPRTAB |
| Width 1 |
5.461 |
