3503-270 – Transmission Yokes – 1350 Series – 26/27 X 1.176 Splines – 1.500″ Hub Dia

The 3503-270 transmission yoke is the connection between the gearbox tailshaft and the front of the driveshaft. It splines onto the transmission output shaft and carries the front u-joint of the driveshaft. For 1350 series applications, the spline count and hub diameter are the two specs that determine whether this part fits your tailshaft correctly.

3503-270 Transmission Yoke — 1350 Series Specs & Tailshaft Fit

The 1350 series covers 3/4-ton trucks — F-250, Ram 2500, Dana 44/60 axles, performance 4x4. The 3503-270 transmission yoke specs: 26/27 X 1.176 spline | 1.500" hub | 6.900" CJ-to-end. Compatible with: Forged yoke w/ induction heat treated hub,. Hub diameter determines engagement depth on the tailshaft — if the hub is too short, the splines don't fully engage. CJ-to-end affects driveshaft working length.

After a transmission rebuild or swap, confirm the tailshaft spline count hasn't changed before installing the 3503-270 transmission yoke. Not all 1350 series transmissions use the same output spline across all years and configurations. Count the splines on the actual shaft.

Key Features

• Series: 1350 — 3/4-ton trucks — F-250, Ram 2500, Dana 44/60 axles, performance 4x4
• Spline: 26/27 X 1.176 — must match transmission tailshaft
• Hub dia: 1.500" — determines spline engagement depth
• CJ-to-end: 6.900" — affects driveshaft working length
• Compatible with: Forged yoke w/ induction heat treated hub,
• Brand: UDS

Specifications

• SKU: 3503-270
• Brand: UDS
• Series: 1350
• Spline: 26/27 X 1.176
• Hub Dia: 1.500"
• CJ to End: 6.900"
• Notes: Forged yoke w/ induction heat treated hub,