The 3-28-137 weld yoke is a critical component in your driveline setup, especially for 1350 Series applications. Before installation, ensure you check the spline count and verify the phasing with the opposite yoke. This yoke connects to the driveshaft and allows for axial movement, which is essential during suspension travel.
Key specifications include a butt diameter of 2.875 inches, a centerline to weld distance of 2.030 inches, and a tube diameter wall of 3.000 x 0.065 inches. Made from durable steel, the 3-28-137 is built to withstand the rigors of performance applications.
- Verify spline engagement depth before sliding the yoke onto the driveshaft.
- Ensure proper phasing with the opposite yoke to prevent vibrations.
- Check that the tube diameter matches your setup for a secure fit.
- Use appropriate tools to avoid damaging the splines during installation.
- Inspect the yoke for any signs of wear or damage before installation.
Remember, the 3-28-137 is designed to fit seamlessly into your driveline system, but proper installation is key to achieving optimal performance. A common mistake is forcing the spline entry; always align it correctly to avoid damage. With the right approach, this yoke will provide reliable service in your vehicle.
