零件号 3103-23 (也写作 3103/23) This 1310 变速箱叉适用于 Toyota & Lexus 自动 Transmissions from as early as 1989 until 2000 (Cressida, SC300)
现货3 件准备发货
大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。
- 配件订单满 $ 免运费1,000
- 14天退货
- 适配咨询: (813) 524-6491
规格 3103-23 · 1310 Series Transmission Yoke
- 零件编号
- 3103-23
- 零件类型
- 变速箱叉
- 状态
- 全新
- 系列
- 1310
- 锪孔直径
- 0
- 万向节中心到端部
- 5.750
- 轮毂直径
- 1.575
- 花键数量和直径
- 23 X 1.201
- 重量
- 2.44 lb
适配性
Toyota applications.
1310 系列零件使用 1.062" 万向节轴承盖,卡簧到卡簧宽度为 3.219" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。
互换 / 交叉参考
- 3103-23-01
3103-23 可替换或互换自 3103-23-01. 交叉参考编号仅供识别;购买替代件前,请先比对上方的系列、花键和螺栓孔距尺寸。
按您的邮编估算运费
计算运费
从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。
佛罗里达州本地自提 — 免费
3103-23 的替代零件
适配相同,编号或品牌不同。替换前请查看备注。
| 添加 | 图片 | 零件号 | 价格 | 系列 | 轮毂直径 | 花键数量和直径 | 万向节中心到端部 | 锪孔直径 | 备注 |
|---|---|---|---|---|---|---|---|---|---|
![]() |
3103-23S |
$78.46
|
1310 | 1.575 | 23 X 1.201 | 5.750 | 0 | MAZDA RX8 AUTO, machined shoulder off hub |
关于 3103-23
The 3103-23 covers Toyota and Lexus rear-wheel-drive automatic transmissions produced from approximately 1989 through 2000, including the Cressida, SC300, and related platforms. Toyota's A-series automatic output shafts in this period used a 23-spline, 1.201" pitch diameter specification -- the same tooth count as the Mazda RX-8 but with a different hub profile (no shoulder removal required on this version).
- 23-spline x 1.201" PD -- Toyota/Lexus A-series automatic; different from Toyota truck manual spec
- 1.575" hub OD -- source tailshaft seal by this dimension; Toyota factory seals are typically 1.575" ID
- 5.750" C-to-end -- stock driveshaft length for Cressida and SC300 rear-drive platforms
- No counterbore -- flat seating face; inspect seal housing for burrs before installation
- Pairs with 1310-series U-joint; replace both joint and yoke as a set on high-mileage vehicles
Tip: the SC300 and Cressida use different driveshaft tube diameters despite sharing the yoke spec -- confirm tube OD before ordering a replacement shaft. The yoke (3103-23) is identical for both, but the tube and rear yoke differ. The transmission yoke is the common first point of failure on high-mileage Toyota RWD platforms due to spline wear from insufficient lubrication.
1310 系列中相关的 变速箱叉
查看完整表格
3103-10
变速箱叉, 1310系列, 10 x 1.375 花键, 轮毂直径 2.125"
$65.98现货
3103-11
变速箱叉, 1310系列, 10 x 1.375 花键, 轮毂直径 2.125"
$76.89现货
3103-12
变速箱叉, 1310系列, 10 x 1.375 花键, 轮毂直径 2.125"
$94.11现货
3103-163
Used on Powerglide transmissions which were on early Chevrolet passeng...
$95.03致电
3103-21
1310 Toyota 变速箱叉适用于 passenger cars 和 trucks from Toyota 和 Lex...
$156.93现货
3103-211
1310 Toyota 20/21 花键变速箱叉适用于 passenger cars 和 trucks from Toy...
$76.99现货
3103-23S
MAZDA RX8 AUTO, machined shoulder off 轮毂变速箱叉 1310
$78.46现货
3103-24
变速箱叉 1310 Nissan 自动 & 手动 Transmissions It Is Used To Replace t...
$91.65现货
3103-23 问题
3103-23 属于哪个系列?
3103-23 是 1310 系列 变速箱叉。1310 系列标称尺寸为 1.062" 轴承盖,卡簧到卡簧宽度为 3.219". 订购前请测量旧万向节的轴承盖直径以确认系列。
3103-23 有多少个花键齿?
3103-23 经切割适用于 23 X 1.201 花键(数量 × 大径)。 请清点输出轴上的花键并测量大径以确认。
3103-23 可替代哪些零件号?
3103-23 交叉对应于 3103-23-01. 互换数据仅供参考;替代前请比对尺寸。
3103-23 有现货吗?
是的。佛罗里达仓库有 3 件现货。工作日美东标准时间(EST)下午2点前下的订单大多当天发货。