6.5-82-461-10U – Yoke Shafts – 1810 Series – 3.000″ Splines Dia – 16 Spline

The 6.5-82-461-10U yoke shaft is an integrated assembly — splined shaft on one end, u-joint yoke on the other. It splines onto the output shaft and carries the u-joint cross simultaneously, in one part. For 1810 series applications, both the spline specification and the u-joint series have to be correct. One wrong dimension on either end and the part doesn't work.

6.5-82-461-10U Yoke Shaft — 1810 Series Spline & CL Specs

The 1810 series covers Class 7-8 commercial and heavy industrial equipment. The 6.5-82-461-10U yoke shaft specs: 3.000" x 16 spline | 4.500" spline length | 15.062" CL-to-end. Spline length determines engagement depth — short engagement under high torque loads damages the output shaft, not just the yoke shaft. CL-to-end positions the u-joint cross relative to the output shaft face; this affects clearance on tight installations.

Verify both ends of the 6.5-82-461-10U yoke shaft before installing: spline count against the output shaft, and series cross size against the driveshaft u-joint. If either is wrong, the part has to come back out. Measure once, order correctly.

Key Features

• Series: 1810 — Class 7-8 commercial and heavy industrial equipment
• Spline: 3.000" x 16 — must match output shaft exactly
• Spline length: 4.500" — full engagement required
• CL-to-end: 15.062" — u-joint position from output shaft face
• Integrated design — splined shaft and u-joint yoke in one piece
• Brand: UDS

Specifications

• SKU: 6.5-82-461-10U
• Brand: UDS
• Series: 1810
• Spline Dia: 3.000"
• Spline Count: 16
• Spline Length: 4.500"
• CL to End: 15.062"