027SG80002 – Cv Double Joints Heads – Pilot Dia 3.819″ – Bolt Circle Dia 3.386″ – Bolt Hole Dia 0.330
$383.99
1 in stock
14
People watching this product now!
Description
027Sg80002 Cv Double Joint Head — 3.386 bolt circle | 3.819 pilot | 2.344″ butt dia | 4.375″ end-to-weld. Complete high-angle CV driveshaft head assembly.
Full Description
The 027SG80002 CV double joint head is the flange-side assembly for constant velocity driveshafts operating at steep angles — SAS builds, long travel suspensions, transfer case drop kits. It provides the ball socket centering mechanism that prevents velocity variation through the joint's full operating range. The 027SG80002 CV double joint head requires exact pilot diameter and bolt circle to seat correctly on the axle or diff flange.
027Sg80002 Cv Double Joint Head — Series: CVJ. Bolt Circle & Pilot Specs
Series: CVJ. The 027SG80002 CV double joint head specs: 3.386 bolt circle | 3.819 pilot | 2.344" butt dia | 4.375" end-to-weld. Fits 98-04 Mercedes ML320/ML350 front shaft at diff and rear shaft at transfer case. Pilot diameter is critical for the centering ball mechanism — a loose pilot allows the CV head to walk off-center at high angles, which defeats the entire purpose of the CV design. End-to-weld factors into compressed driveshaft length calculations.
Before ordering the 027SG80002 CV double joint head, measure your existing flange bolt circle and pilot in millimeters or decimal inches. European and Toyota flanges vary by year and application — spec sheet data isn't always reliable on swapped or modified vehicles. Measure the actual flange.
Key Features
- Series: CVJ
- Bolt circle: 3.386 — must match flange bolt pattern exactly
- Pilot dia: 3.819 — centers CV head on flange, critical for CV function
- Butt dia: 2.344" — driveshaft tube connection point
- End-to-weld: 4.375" — factors into compressed shaft length
- Tube fit: 2.500X0.083
- CV double joint design — eliminates velocity variation at steep operating angles
- Note: Fits 98-04 Mercedes ML320/ML350 front shaft at diff and rear shaft at transfer case
Specifications
- SKU: 027SG80002
- Brand: UDS
- Series: CVJ
- Bolt Circle: 3.386
- Pilot Dia: 3.819
- Butt Dia: 2.344"
- End to Weld: 4.375"
- Tube Fit: 2.500X0.083
- Notes: Fits 98-04 Mercedes ML320/ML350 front shaft at diff and rear shaft at transfer case
Additional information
| Partn number |
027SG80002 |
|---|---|
| Pilot dia |
3.819 |
| Bolt circle dia |
3.386 |
| Bolt hole dia |
330 |
| Notes |
Fits 98-04 Mercedes ML320/ML350 front shaft at diff and rear shaft at transfer case |
| Style series |
CVJ |
| Tube dia wall |
2.500X0.083 |
| Butt dia |
2.344 |
| End to weld |
4.375 |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cv Double Joints Heads (24) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.386 Bolt hole dia 330 Notes Fits 01-05 Ford Escape/Mazda Tribute rear shaft at transaxle Partn number 027SG80004 Pilot dia 3.937 Style series CVJ Tube dia wall 2.500X0.065 Butt dia 2.375 End to weld 6.125 COMPRESSED | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.583 Bolt hole dia 330 Butt dia 1.571 End to weld 4.75 Notes Fits 97-98 Ford Ranger/Explorer at transfer case Partn number 032SG80002 Pilot dia 4.094 Style series CVJ Tube dia wall 1.750X0.095 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia N/A Bolt hole dia N/A Butt dia 2.344 End to weld N/A Notes 25 Spline, AUDI Partn number 2552-8780 Pilot dia N/A Style series CVJ Tube dia wall 2.500X0.083 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.386 Bolt hole dia 330 Butt dia 2.375 End to weld 6.125 COMPRESSED Notes Fits 01-05 Ford Escape/Mazda Tribute rear shaft at transaxle Partn number 2690-100 Pilot dia 3.937 Style series CVJ Tube dia wall 2.500X0.065 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia N/A Bolt hole dia N/A Butt dia 2.344 End to weld 3.250 Notes 34 Spline, M39X1.5 THREADED, BMW Partn number 2752-8734 Pilot dia 1.614 Style series CVJ Tube dia wall 2.500X0.083 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia Blank Bolt hole dia N/A Butt dia 2.440 End to weld 5.75 Notes Toyota 1510 SERIES Partn number 2990-1839B Pilot dia 1.808 Style series 1510 Tube dia wall 2.560 x 0.067 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.386 Bolt hole dia 330 Butt dia 2.344 End to weld 4.375 Notes Fits 98-04 Mercedes ML320/ML350 front shaft at diff and rear shaft at transfer case Partn number 3190-100 Pilot dia 3.819 Style series CVJ Tube dia wall 2.500X0.083 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.583 Bolt hole dia 330 Butt dia 1.571 End to weld 4.75 Notes Fits 97-98 Ford Ranger/Explorer at transfer case Partn number 3190-107 Pilot dia 4.094 Style series CVJ Tube dia wall 1.750X0.095 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.575 REC Bolt hole dia 331 Butt dia 2.435 End to weld 5.75 Notes Toyota/1310CV conversion, includes increase bushing for OEM tubing Partn number 3190-181 Pilot dia 1.808 Style series 1310 CV FLANGE Tube dia wall 2.560X0.067 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.665 REC Bolt hole dia 388 Butt dia 2.435 End to weld 5.75 Notes Toyota/1310CV conversion, includes increase bushing for OEM tubing Partn number 3190-182 Pilot dia 1.808 Style series 1310 CV FLANGE Tube dia wall 2.560X0.067 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
