T2-2-489A – Flange Yokes – 1330 Series – Bolt Circle Dia 3.750″ – Pilot Dia 2.750, M

Replacing a worn or damaged flange yoke starts with getting the right part. The T2-2-489A flange yoke is dimensioned for one bolt circle, one pilot diameter, and one drivetrain series — 1330 series. A mismatched bolt circle means the yoke won't seat flat. A wrong pilot means the driveshaft runs off-center. The T2-2-489A flange yoke removes both risks.

T2-2-489A Flange Yoke — 1330 Series Specifications & Fitment

The 1330 series covers light-to-medium duty trucks and GM half-ton platforms. The T2-2-489A flange yoke specs: 3.750 bolt circle | 2.750 pilot | 4x0.438 bolt holes | 1.562" CJ-to-flat. Pilot diameter is what centers the yoke on the companion flange — that dimension must match exactly or the driveshaft will run off-center at speed. Bolt circle determines your hole pattern match.

Before ordering the T2-2-489A flange yoke, measure your diff flange bolt circle and pilot diameter directly. Don't rely on series designation alone — after an axle swap, the flange dimensions may differ from the original factory spec. Brand: UDS. Verify, then order.

Key Features

• Series: 1330 — built for light-to-medium duty trucks and GM half-ton platforms
• Bolt circle: 3.750 — must match axle/diff flange hole pattern exactly
• Pilot dia: 2.750 — centers yoke on companion flange, no play allowed
• 4 bolt holes at 0.438 — verify hole count and size
• CJ-to-flat: 1.562" — affects driveshaft working angle clearance
• Brand: UDS — direct-fit replacement

Specifications

• SKU: T2-2-489A
• Brand: UDS
• Series: 1330
• Bolt Circle: 3.750
• Pilot Dia: 2.750
• Bolt Holes: 4
• Bolt Hole Dia: 0.438
• CJ to Flat: 1.562"