T2-3-12081HP – Transmission Yokes – 1330 Series – 26/27 X 1.176 Splines – 1.500″ Hub Dia

The T2-3-12081HP transmission yoke is the connection between the gearbox tailshaft and the front of the driveshaft. It splines onto the transmission output shaft and carries the front u-joint of the driveshaft. For 1330 series applications, the spline count and hub diameter are the two specs that determine whether this part fits your tailshaft correctly.

T2-3-12081Hp Transmission Yoke — 1330 Series Specs & Tailshaft Fit

The 1330 series covers light-to-medium duty trucks and GM half-ton platforms. The T2-3-12081HP transmission yoke specs: 26/27 X 1.176 spline | 1.500" hub | 5.470" CJ-to-end. Compatible with: TH350 / Forged Steel / Black Oxidized / CHROMOLY. Hub diameter determines engagement depth on the tailshaft — if the hub is too short, the splines don't fully engage. CJ-to-end affects driveshaft working length.

After a transmission rebuild or swap, confirm the tailshaft spline count hasn't changed before installing the T2-3-12081HP transmission yoke. Not all 1330 series transmissions use the same output spline across all years and configurations. Count the splines on the actual shaft.

Key Features

• Series: 1330 — light-to-medium duty trucks and GM half-ton platforms
• Spline: 26/27 X 1.176 — must match transmission tailshaft
• Hub dia: 1.500" — determines spline engagement depth
• CJ-to-end: 5.470" — affects driveshaft working length
• Compatible with: TH350 / Forged Steel / Black Oxidized / CHROMOLY
• Brand: UDS

Specifications

• SKU: T2-3-12081HP
• Brand: UDS
• Series: 1330
• Spline: 26/27 X 1.176
• Hub Dia: 1.500"
• CJ to End: 5.470"
• Notes: TH350 / Forged Steel / Black Oxidized / CHROMOLY