DLW-2 – Balance Weigths – Notes Steel 5.0 Gram / .17oz Round – Weight 0.17

The DLW-2 balance weight is used in dynamic driveshaft balancing — placed on the tube surface at the specific angular position and distance from the tube end determined by the balancer reading. Weight: 0.17 oz. Steel 5.0 Gram / .17oz Round with hole in center, Box 250. The DLW-2 balance weight is a steel round with center hole for tack-weld attachment.

Dlw-2 Balance Weight — Dynamic Balance Specs

Dynamic balance procedure with the DLW-2 balance weight: run shaft at 250-500 RPM, mark heavy spot, position weight 180 degrees opposite. Tack weld, recheck at operating speed. Steel construction, consistent weight per unit.

Don't stack multiple balance weights at the same location — space them angularly if multiple weights are needed. The DLW-2 balance weight is sized for standard driveshaft tube attachment.

Key Features

• Weight: 0.17 oz
• Note: Steel 5.0 Gram / .17oz Round with hole in center, Box 250
• Brand: UDS

Specifications

• SKU: DLW-2
• Brand: UDS
• Weight: 0.17
• Notes: Steel 5.0 Gram / .17oz Round with hole in center, Box 250