3102-9068 – Flange Yokes – 1310 Series – Bolt Circle Dia 2.930″ – Pilot Dia 1.852, F

Replacing a worn or damaged flange yoke starts with getting the right part. The 3102-9068 flange yoke is dimensioned for one bolt circle, one pilot diameter, and one drivetrain series — 1310 series. A mismatched bolt circle means the yoke won't seat flat. A wrong pilot means the driveshaft runs off-center. The 3102-9068 flange yoke removes both risks.

3102-9068 Flange Yoke — 1310 Series Specifications & Fitment

The 1310 series covers light-duty trucks — F-150, Silverado 1500, Jeep Wrangler, Ram 1500. The 3102-9068 flange yoke specs: 2.930 bolt circle | 1.852 pilot | 6x0.315 bolt holes | 2.000" CJ-to-flat. Pilot diameter is what centers the yoke on the companion flange — that dimension must match exactly or the driveshaft will run off-center at speed. Bolt circle determines your hole pattern match.

Before ordering the 3102-9068 flange yoke, measure your diff flange bolt circle and pilot diameter directly. Don't rely on series designation alone — after an axle swap, the flange dimensions may differ from the original factory spec. Brand: UDS. Verify, then order.

Key Features

• Series: 1310 — built for light-duty trucks — F-150, Silverado 1500, Jeep Wrangler, Ram 1500
• Bolt circle: 2.930 — must match axle/diff flange hole pattern exactly
• Pilot dia: 1.852 — centers yoke on companion flange, no play allowed
• 6 bolt holes at 0.315 — verify hole count and size
• CJ-to-flat: 2.000" — affects driveshaft working angle clearance
• Brand: UDS — direct-fit replacement

Specifications

• SKU: 3102-9068
• Brand: UDS
• Series: 1310
• Bolt Circle: 2.930
• Pilot Dia: 1.852
• Bolt Holes: 6
• Bolt Hole Dia: 0.315
• CJ to Flat: 2.000"