2880-64 – Center Support Bearing – Mercedes Application – 1.181″ ID – 1.000″ Center Bearing To Base

When working with the 2880-64 center support bearing, it’s crucial to ensure proper installation for optimal performance in Mercedes 4-cylinder models from 1968 to 1977, including the 200, 220, and 230. This bearing features a 1.181″ ID and a center-to-base height of 1.000″, which is critical for maintaining the correct driveshaft angle and alignment.

Before installation, check the center-to-center mounting hole distance of 4.950″ to ensure it matches your application. A common mistake is pre-loading the rubber isolator during installation, which can lead to premature failure and driveline vibration. Instead, align the mounting bracket properly before tightening any fasteners.

Keep in mind that the rubber isolator absorbs vibration; if you notice symptoms like bearing noise or excessive vibration at highway speeds, it may indicate a hardened or collapsed isolator. The 2880-64 requires the 6006LLU bearing (30mm ID) to be placed with the housing and rubber only, so ensure you have the right components on hand.

• Check the 1.181″ bearing ID for compatibility.
• Verify the 4.950″ center-to-center mounting hole distance.
• Do not pre-load the rubber during installation.
• Align the mounting bracket before tightening.
• Inspect for signs of rubber deterioration.

Using the 2880-64 correctly will enhance the service life of your driveline under load conditions, ensuring a smoother ride and better overall performance.