2580-67 – 67 – Center Support Bearing – 1.378″ ID – 1.000″ Center Bearing To Base

The 2580-67 center support bearing is a crucial component for maintaining the integrity of a two-piece driveshaft. With a bearing inner diameter of 1.378 inches, this part is engineered to provide reliable support and alignment, reducing the risk of driveline vibration. The center-to-base height measures 1.000 inch, which is essential for maintaining the correct operating angle of the driveshaft. If this dimension is incorrect, it can lead to increased wear and potential failure of the driveline components.

One of the standout features of the 2580-67 is its center-to-center mounting hole spacing of 5.500 inches. This specific measurement ensures compatibility with various applications and helps maintain the necessary alignment. If you were to use a similar bearing with a different hole spacing, you might encounter misalignment issues that could result in excessive vibration or even damage to the driveshaft.

• Do not pre-load the rubber isolator during installation.
• Ensure the mounting bracket is aligned before tightening.
• Check the driveshaft runout after installation to confirm proper alignment.

In summary, the 2580-67 is designed for service life under load conditions, making it a reliable choice for both performance builders and fleet technicians. Its specific dimensions and features set it apart from other bearings in the market, ensuring that it meets the demands of various applications.