When you encounter driveline vibrations in a Honda CR-V from 1997 to 2001, the culprit may often be the center support bearing. The 2280-10 center support bearing is engineered specifically for this application, featuring a bearing inner diameter of 0.985 inches. This snug fit is crucial for maintaining the alignment of a two-piece driveshaft, effectively reducing whip and vibration during operation.
With a center-to-base height of 0.500 inches and a distance of 6.875 inches between the center of the mounting holes, this bearing ensures that the driveshaft operates at the correct angle. If the rubber isolator within the bearing has collapsed or hardened, you might notice increased vibration at highway speeds or hear bearing noise. These symptoms indicate that it’s time to replace the center support bearing.
To install the 2280-10, be sure to avoid pre-loading the rubber isolator during installation. Align the mounting bracket properly before tightening to prevent any misalignment issues. Checking the driveshaft runout after installation can also help ensure optimal performance.
- Application: Honda CR-V 1997-2001
- Bearing ID: 0.985 inches
- Center Bearing to Base: 0.500 inches
- Center to Center of Mount Holes: 6.875 inches
- Replace if rubber isolator shows signs of deterioration
