When you encounter a vehicle that struggles with binding during articulation, the solution often lies in the U Joint. The 1350 U Joint, with its innovative offset design, provides a significant increase in flexibility—up to 10 degrees more than conventional joints. This means that when installed in a standard yoke, it allows for over 5 inches of additional axle droop before joint binding occurs, which is crucial for vehicles with a 30-inch drive shaft.
With a cap diameter of 1.188″ and a width of 3.625″, this U Joint is engineered to handle the stresses of high-torque applications while maintaining smooth operation. The greaseable feature ensures that you can extend the service life of the joint, making it a practical choice for both performance builders and fleet technicians alike.
- Cap Diameter: 1.188″ for robust torque transfer
- Width: 3.625″ to fit standard yokes
- Offset design enhances flexibility and reduces binding
- Greaseable for extended service life
- Ideal for high-angle applications
When installing the 1350 U Joint, ensure that you check for binding and verify that the snap rings are fully seated. This attention to detail will help you avoid premature failure and keep your driveline running smoothly.
