零件号 1442-209 (也写作 1442/209) 短中间轴, 16 X 1.063 花键, 端面直径 1.812", 管径 2.000
现货1 件准备发货
大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。
- 配件订单满 $ 免运费1,000
- 14天退货
- 适配咨询: (813) 524-6491
规格 1442-209 · Stub Shaft
- 零件编号
- 1442-209
- 零件类型
- Stub Shaft
- 状态
- 全新
- 样式
- Slip
- 传动轴管直径
- 2.000
- 管壁厚
- 0.095"
- 花键数量和直径
- 16 X 1.063
- 对接直径
- 1.812
- 端部到焊缝
- 4.155
- 花键长度
- 1.978
- 重量
- 1.39 lb
适配性
USE WITH : 1403-16
按您的邮编估算运费
计算运费
从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。
佛罗里达州本地自提 — 免费
关于 1442-209
A failed midship shaft announces itself as vibration that worsens at highway speed and does not disappear after U-joint replacement. The 1442-209 stub midship shaft -- 16 X 1.063 splines, 1.812" butt, 2.000" x 0.095" tube -- provides a precision replacement that restores the dimensional accuracy required for a vibration-free two-piece driveshaft.
Midship Shaft Failure Modes
Stub midship shafts fail for several reasons: center support bearing collapse allows tube deflection; corrosion attacks the tube wall, reducing structural stiffness; and impact damage introduces runout that unbalances the entire driveshaft assembly. The 1442-209 eliminates these issues with a fresh, balanced tube and factory-accurate dimensions.
Part Data
| Specification | Value |
|---|---|
| SKU | 1442-209 |
| Splines | 16 X 1.063" |
| Spline Length | 1.978" |
| Butt Diameter | 1.812" |
| Tube O.D. | 2.000" |
| Tube Wall Thickness | 0.095" |
| End to Weld | 4.155" |
Center Support Bearing Interface
The center support bearing seats on the butt diameter (1.812") of the 1442-209. The bearing must be fully pressed to its seat and the bracket fasteners torqued correctly to hold the midship shaft in the proper driveline angle. An incorrectly shimmed or loose center support bearing transfers vibration into the cab and will damage the bearing itself in short order.
Replacement Steps
- Remove the rear driveshaft section first to gain access to the midship shaft
- Unbolt the center support bearing bracket from the crossmember
- Mark the front yoke orientation before sliding off the output shaft
- Press center support bearing onto 1442-209 butt diameter
- Install in reverse order; shim center bearing for correct driveline angle
- Road test to verify absence of vibration at all speeds
Get the Right Part Fast
Universal Driveshafts stocks the 1442-209 and matching center support bearings. Order both together for a complete midship assembly. Our driveline team can help you verify fitment using your vehicle's driveshaft data plate dimensions.
相关的 Stub & Midship Shaft
查看完整表格
1253-242
1253-242
$59.95现货
1253-261
短中间轴, 26 x 1.115 花键, 端面直径 2.375", 管径×壁厚 2.500X0.065
$59.95现货
1340-20
短中间轴, 20 X 1.310 花键, 端面直径 2.435", 端部至焊缝 7.500
$59.82现货
1340-20L
短中间轴, 20 X 1.310 花键, 端面直径 2.435", 管径×壁厚 2.560x0.065
$109.16现货
1340-21
短中间轴, 20 X 1.310 花键, 端面直径 2.435", 管径×壁厚 2.560x0.065
$73.13现货
1442-17
Stub & Midship Shaft, 16 X 1.063 花键, 端面直径 1.625", 管径×壁厚 1.75...
$84.04现货
1442-20
Stub & Midship Shaft, 16 X 1.063 花键, 端面直径 1.875", 管径 2.000
$48.54现货
1442-202
短中间轴, 20 X 0.853 花键, 端面直径 1.875", 管径×壁厚 2.000x0.065
$58.69现货
1442-209 问题
1442-209 有多少个花键齿?
1442-209 经切割适用于 16 X 1.063 花键(数量 × 大径)。 请清点输出轴上的花键并测量大径以确认。
1442-209 有现货吗?
是的。佛罗里达仓库有 1 件现货。工作日美东标准时间(EST)下午2点前下的订单大多当天发货。