Part No. 1442-20 (also written 1442/20) Stub & Midship Shaft, 16 X 1.063 Splines, Butt Dia 1.875", Tube Dia 2.000
In stock1 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 1442-20 · Stub Shaft
- Part number
- 1442-20
- Part type
- Stub Shaft
- Condition
- New
- Style
- Slip
- Tube diameter
- 2.000
- Tube wall
- 0.065"
- Butt diameter
- 1.875
- End to weld
- 4.125
- Splines count diameter
- 16 X 1.063
- Splines length
- 2.000
- Weight
- 1.34 lb
Fitment
Send us the number off the old part and we will confirm the fit before you order.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 1442-20
A failed midship shaft announces itself as vibration that worsens at highway speed and does not disappear after U-joint replacement. The 1442-20 stub midship shaft -- 16 X 1.063 splines, 1.875" butt, 2.000" x 0.065" tube -- provides a precision replacement that restores the dimensional accuracy required for a vibration-free two-piece driveshaft.
Midship Shaft Failure Modes
Stub midship shafts fail for several reasons: center support bearing collapse allows tube deflection; corrosion attacks the tube wall, reducing structural stiffness; and impact damage introduces runout that unbalances the entire driveshaft assembly. The 1442-20 eliminates these issues with a fresh, balanced tube and factory-accurate dimensions.
Part Data
| Specification | Value |
|---|---|
| SKU | 1442-20 |
| Splines | 16 X 1.063" |
| Spline Length | 2.000" |
| Butt Diameter | 1.875" |
| Tube O.D. | 2.000" |
| Tube Wall Thickness | 0.065" |
| End to Weld | 4.125" |
Center Support Bearing Interface
The center support bearing seats on the butt diameter (1.875") of the 1442-20. The bearing must be fully pressed to its seat and the bracket fasteners torqued correctly to hold the midship shaft in the proper driveline angle. An incorrectly shimmed or loose center support bearing transfers vibration into the cab and will damage the bearing itself in short order.
Replacement Steps
- Remove the rear driveshaft section first to gain access to the midship shaft
- Unbolt the center support bearing bracket from the crossmember
- Mark the front yoke orientation before sliding off the output shaft
- Press center support bearing onto 1442-20 butt diameter
- Install in reverse order; shim center bearing for correct driveline angle
- Road test to verify absence of vibration at all speeds
Get the Right Part Fast
Universal Driveshafts stocks the 1442-20 and matching center support bearings. Order both together for a complete midship assembly. Our driveline team can help you verify fitment using your vehicle's driveshaft data plate dimensions.
Related Stub & Midship Shaft
See the full table
1253-242
1253-242
$59.95In stock
1253-261
Stub Midship Shaft, 26 x 1.115 Splines, Butt Dia 2.375", Tube Dia Wall...
$59.95In stock
1340-20
Stub Midship Shaft, 20 X 1.310 Splines, Butt Dia 2.435", End To Weld 7...
$59.82In stock
1340-20L
Stub Midship Shaft, 20 X 1.310 Splines, Butt Dia 2.435", Tube Dia Wall...
$109.16In stock
1340-21
Stub Midship Shaft, 20 X 1.310 Splines, Butt Dia 2.435", Tube Dia Wall...
$73.13In stock
1442-17
Stub & Midship Shaft, 16 X 1.063 Splines, Butt Dia 1.625", Tube Dia Wa...
$84.04In stock
1442-202
Stub Midship Shaft, 20 X 0.853 Splines, Butt Dia 1.875", Tube Dia Wall...
$58.69In stock
1442-209
Stub Midship Shaft, 16 X 1.063 Splines, Butt Dia 1.812", Tube Dia 2.00...
$48.50In stock
1442-20 questions
What spline count does 1442-20 have?
1442-20 is cut for 16 X 1.063 splines (count × major diameter). Count the splines on the output shaft and measure across the major diameter to confirm.
Is 1442-20 in stock?
Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.