$1,000以上のパーツは米国送料無料
1442-209 Stub Shaft
Slip

部品番号 1442-209 (別表記 1442/209) スタブミッドシップシャフト, 16 X 1.063 スプライン, バット径 1.812", チューブ径 2.000

$48.50

在庫あり1 件の出荷準備完了

在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。

  • 部品注文の送料無料金額 $1,000
  • 14日以内返品可能
  • 適合に関するサポート: (813) 524-6491

仕様 1442-209 · Stub Shaft

計測方法文字にカーソルを合わせると、その寸法が表示されます
EBADFC
部品番号
1442-209
パーツタイプ
Stub Shaft
状態
新品
スタイル
Slip
チューブ径
2.000
チューブ肉厚
0.095"
スプライン数と径
16 X 1.063
バット径
1.812
端部から溶接部まで
4.155
スプラインの長さ
1.978
重量
1.39 lb

適合性

USE WITH : 1403-16

郵便番号への送料を見積もる

送料を計算

フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。

フロリダでの店頭受取 — 無料

1442-209 について

A failed midship shaft announces itself as vibration that worsens at highway speed and does not disappear after U-joint replacement. The 1442-209 stub midship shaft -- 16 X 1.063 splines, 1.812" butt, 2.000" x 0.095" tube -- provides a precision replacement that restores the dimensional accuracy required for a vibration-free two-piece driveshaft.

Midship Shaft Failure Modes

Stub midship shafts fail for several reasons: center support bearing collapse allows tube deflection; corrosion attacks the tube wall, reducing structural stiffness; and impact damage introduces runout that unbalances the entire driveshaft assembly. The 1442-209 eliminates these issues with a fresh, balanced tube and factory-accurate dimensions.

Part Data

SpecificationValue
SKU1442-209
Splines16 X 1.063"
Spline Length1.978"
Butt Diameter1.812"
Tube O.D.2.000"
Tube Wall Thickness0.095"
End to Weld4.155"

Center Support Bearing Interface

The center support bearing seats on the butt diameter (1.812") of the 1442-209. The bearing must be fully pressed to its seat and the bracket fasteners torqued correctly to hold the midship shaft in the proper driveline angle. An incorrectly shimmed or loose center support bearing transfers vibration into the cab and will damage the bearing itself in short order.

Replacement Steps

  • Remove the rear driveshaft section first to gain access to the midship shaft
  • Unbolt the center support bearing bracket from the crossmember
  • Mark the front yoke orientation before sliding off the output shaft
  • Press center support bearing onto 1442-209 butt diameter
  • Install in reverse order; shim center bearing for correct driveline angle
  • Road test to verify absence of vibration at all speeds

Get the Right Part Fast

Universal Driveshafts stocks the 1442-209 and matching center support bearings. Order both together for a complete midship assembly. Our driveline team can help you verify fitment using your vehicle's driveshaft data plate dimensions.

関連する Stub & Midship Shaft

全一覧表を見る

1442-209 ご質問

1442-209 のスプライン数はいくつですか?

1442-209 はスプライン 16 X 1.063(山数 × 外径)用に加工されています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。

1442-209 の在庫はありますか?

はい。フロリダ州に 1 点の在庫がございます。平日の東部標準時(EST)午後2時までのご注文の多くは、当日中に発送いたします。

この翻訳はAIによって作成されたものであり、エラーが含まれている可能性があります。ご不明な点がございましたら、(813) 524-6491にお電話いただくか、英語に切り替えてください。