N.º de parte 1442-209 (también escrito 1442/209) Eje intermedio (stub), 16 X 1.063 estrías, Diám. de asiento 1.812", Diám. tubo 2.000
En stock1 listos para enviar
La mayoría de las piezas en stock salen el mismo día si se piden antes de las 2pm EST; los tiempos de procesamiento pueden variar.
- Envío gratis en pedidos de piezas de más de $1,000
- Devoluciones en 14 días
- Ayuda con la compatibilidad: (813) 524-6491
Especificaciones 1442-209 · Stub Shaft
- Número de pieza
- 1442-209
- Tipo de pieza
- Stub Shaft
- Condición
- Nuevo
- Estilo
- Slip
- Diámetro de tubo
- 2.000
- Pared de tubo
- 0.095"
- Cantidad y diám. de estrías
- 16 X 1.063
- Diámetro de asiento
- 1.812
- Extremo a soldadura
- 4.155
- Largo de estrías
- 1.978
- Peso
- 1.39 lb
Compatibilidad
USE WITH : 1403-16
Calcula el envío a tu código postal
Calcular envío
Tarifas UPS en vivo desde nuestro taller en Florida. Los pedidos de piezas de más de $1,000 tienen envío gratis; el tubo y los cardanes completos siempre se envían con la tarifa UPS.
Retiro en tienda en Florida: gratis
Acerca de 1442-209
A failed midship shaft announces itself as vibration that worsens at highway speed and does not disappear after U-joint replacement. The 1442-209 stub midship shaft -- 16 X 1.063 splines, 1.812" butt, 2.000" x 0.095" tube -- provides a precision replacement that restores the dimensional accuracy required for a vibration-free two-piece driveshaft.
Midship Shaft Failure Modes
Stub midship shafts fail for several reasons: center support bearing collapse allows tube deflection; corrosion attacks the tube wall, reducing structural stiffness; and impact damage introduces runout that unbalances the entire driveshaft assembly. The 1442-209 eliminates these issues with a fresh, balanced tube and factory-accurate dimensions.
Part Data
| Specification | Value |
|---|---|
| SKU | 1442-209 |
| Splines | 16 X 1.063" |
| Spline Length | 1.978" |
| Butt Diameter | 1.812" |
| Tube O.D. | 2.000" |
| Tube Wall Thickness | 0.095" |
| End to Weld | 4.155" |
Center Support Bearing Interface
The center support bearing seats on the butt diameter (1.812") of the 1442-209. The bearing must be fully pressed to its seat and the bracket fasteners torqued correctly to hold the midship shaft in the proper driveline angle. An incorrectly shimmed or loose center support bearing transfers vibration into the cab and will damage the bearing itself in short order.
Replacement Steps
- Remove the rear driveshaft section first to gain access to the midship shaft
- Unbolt the center support bearing bracket from the crossmember
- Mark the front yoke orientation before sliding off the output shaft
- Press center support bearing onto 1442-209 butt diameter
- Install in reverse order; shim center bearing for correct driveline angle
- Road test to verify absence of vibration at all speeds
Get the Right Part Fast
Universal Driveshafts stocks the 1442-209 and matching center support bearings. Order both together for a complete midship assembly. Our driveline team can help you verify fitment using your vehicle's driveshaft data plate dimensions.
Stub & Midship Shaft relacionados
Ver la tabla completa
1253-242
1253-242
$59.95En stock
1253-261
Eje intermedio (stub), 26 x 1.115 estrías, Diám. de asiento 2.375", Di...
$59.95En stock
1340-20
Eje intermedio (stub), 20 X 1.310 estrías, Diám. de asiento 2.435", Ex...
$59.82En stock
1340-20L
Eje intermedio (stub), 20 X 1.310 estrías, Diám. de asiento 2.435", Di...
$109.16En stock
1340-21
Eje intermedio (stub), 20 X 1.310 estrías, Diám. de asiento 2.435", Di...
$73.13En stock
1442-17
Stub & Midship Shaft, 16 X 1.063 estrías, Diám. de asiento 1.625", Diá...
$84.04En stock
1442-20
Stub & Midship Shaft, 16 X 1.063 estrías, Diám. de asiento 1.875", Diá...
$48.54En stock
1442-202
Eje intermedio (stub), 20 X 0.853 estrías, Diám. de asiento 1.875", Di...
$58.69En stock
1442-209 preguntas
¿Cuántas estrías tiene 1442-209?
1442-209 está cortado para estrías 16 X 1.063 (cantidad × diámetro mayor). Cuenta las estrías del eje de salida y mide el diámetro mayor para confirmar.
¿Hay 1442-209 en existencia?
Sí. Hay 1 en existencia en Florida. La mayoría de los pedidos hechos antes de las 2 p. m. EST en día hábil salen el mismo día.