7290 Series Driveshaft Parts
The 7290 is the larger Chrysler / Dodge series (1.125" caps, 2.625" width) used on Mopar performance cars and Dodge trucks. Nominal 7290 dimensions: 1.125" bearing cap diameter, 2.625" snap-ring-to-snap-ring width. Measure the caps on your old joint to confirm the series before ordering.
- 1.125" Cap diameter (nominal)
- 2.625" Width, ring to ring
- 18 Parts in stock
- 5 Categories
-
2926-32
Tube Weld Yoke 7290 Series, Inside Snap Ring Style
$44.46 -
2926-27
Weld Yokes, 7290 Series, Butt Dia 2.625", Tube Dia Wall 2.750X0....
$45.13 -
2926-30
Weld Yokes, 7290 Series, Butt Dia 2.844", Tube Dia Wall 3.000X0....
$45.13 -
2926-41
Weld Yokes, 7290 Series, Butt Dia 3.844", Tube Dia Wall 4.000X0....
$45.90 -
2926-31
Weld Yokes, 7290 Series, Butt Dia 2.875", Tube Dia Wall 3.000X0....
$47.30 -
2926-40
Weld Yokes, 7290 Series, Butt Dia 3.875", Tube Dia Wall 4.000X0....
$99.42
7290 series questions
What size is a 7290 series u-joint?
A 7290 series universal joint has 1.125" diameter bearing caps and measures 2.625" from snap ring to snap ring (outside of cap to outside of cap). These are nominal figures; measure the caps on your old joint with a caliper to confirm the series.
Is the 7290 series the same as the 3R?
No. The 7290 and 3R series share the same 1.125" cap diameter but differ in width, so their yokes are not interchangeable. Use a conversion u-joint when you need to join a 7290 yoke to a yoke from a different series.
Which 7290 series parts does UDS stock?
18 7290 series parts across 5 categories: 6 weld yokes, 4 end yokes, 3 strap kits, 3 transmission yokes, 2 universal joints. Everything listed in stock ships the same day from Florida when ordered before 2pm EST.
How do I match 7290 series parts on a driveshaft?
Every u-joint on the shaft must match the yokes it sits in: a 7290 series joint needs 7290 series weld yokes, slip yokes, end yokes or flange yokes (1.125" cap bores). Mixed-series shafts use a conversion joint with a different cap size on each axis.
Other u-joint series
- 1310 · 1.062"
- 1350 · 1.188"
- 1410 · 1.188"
- 1330 · 1.062"
- 1480 · 1.375"
- 1550 · 1.375"
- 3R · 1.125"
- 1710 · 1.938"
- 1000
- 1610 · 1.625"
- 7260 · 1.078"
- 1810 · 2.125"
- 1251
- SPL170
- 1210 · 1.062"
- 1100
- 1760 · 1.938"
- 1751
- SPL90
- SPL250
- 1300
- 1351-20
- SPL100
- SPL140
- 2351-20
- 1330F
- 1880
- 1510
- 1500
- 2351
- 9951-22
- SPL350
- 1485
- 1310HR
- 1351-21
- 1800
- 1551-20
- 1270
- 1310WJ
- 3451
- SPL70
- 2055
- 1555
- 2351-21
Series designations (1310, 1350, 3R, SPL…) are Spicer® / Dana® nomenclature used across the industry and are shown for identification and cross-reference only. Dimensions are nominal; verify fitment before ordering. Copyright & trademark notice