Free U.S. shipping on parts over $1,000 (813) 524-6491 Cart

1330 Series Driveshaft Parts

All series

The 1330 uses the same 1.062" caps as the 1310 with a wider 3.625" span, so 1330 yokes clear more angle. Common on Ford 1/2 and 3/4-ton trucks and as a conversion step between 1310 and 1350. Nominal 1330 dimensions: 1.062" bearing cap diameter, 3.625" snap-ring-to-snap-ring width. Measure the caps on your old joint to confirm the series before ordering.

  • 1.062" Cap diameter (nominal)
  • 3.625" Width, ring to ring
  • 138 Parts in stock
  • 16 Categories

1330 Series Transmission Yokes 49

All 49 in the table
  • 2-3-6041X Transmission Yoke 1330 Series, Splines Count: 31 Splines Ins 2-3-6041X Transmission Yoke 1330 Series, Splines Count: 31 Splines Inside...
    $31.07
  • 2-3-1205XU 2-3-12051X Tranny Yoke 1330 Series Hub: 1.500 Splines Count: 2-3-1205XU 2-3-12051X Tranny Yoke 1330 Series Hub: 1.500 Splines Count: 26/...
    $38.02
  • 2-3-14031X Transmission Slip Yoke..1330 series, 1.284x30 spline, 1.680 2-3-14031X Transmission Slip Yoke..1330 series, 1.284x30 spline, 1.680 Grou...
    $41.44
  • P2-3-6041XU Transmission Yokes, 1330 Series, 30/31 X 1.391 Splines, 1.68 P2-3-6041XU Transmission Yokes, 1330 Series, 30/31 X 1.391 Splines, 1.685" H...
    $55.68
  • 3303-327 Transmission Yokes, 1330 Series, 31/32 X 1.378 Splines, 1.70 3303-327 Transmission Yokes, 1330 Series, 31/32 X 1.378 Splines, 1.700" H...
    $60.93
  • 3303-251 Transmission Yokes, 1330 Series, 24/25 X 1.113 Splines, 1.37 3303-251 Transmission Yokes, 1330 Series, 24/25 X 1.113 Splines, 1.375" H...
    $69.67

1330 Series Weld Yokes 23

All 23 in the table
  • 2-28-1177 Weld Tube Yoke 1330 Ser', Fits: 3.000 x 0.065, Butt: 2.875 C 2-28-1177 Weld Tube Yoke 1330 Ser', Fits: 3.000 x 0.065, Butt: 2.875 Cente...
    $17.27
  • 2-28-1697 Weld Tube Yoke 1330, Fits: 3.000 x 0.083 Tube, Butt Dia: 2.8 2-28-1697 Weld Tube Yoke 1330, Fits: 3.000 x 0.083 Tube, Butt Dia: 2.844 C...
    $18.72
  • 2-28-1707 Weld Tube Yoke 1330 Ser', Fits : 2.500 x 0.083 Tube, Butt: 2 2-28-1707 Weld Tube Yoke 1330 Ser', Fits : 2.500 x 0.083 Tube, Butt: 2.344...
    $19.04
  • 2-28-1977 Tube Yoke 1330 Ser', Fits: 3.500 X 0.065, Butt Dia: 3.381, C 2-28-1977 Tube Yoke 1330 Ser', Fits: 3.500 X 0.065, Butt Dia: 3.381, CL To...
    $19.67
  • 2-28-1717 Weld Tube Yoke 1330 Ser', Fits: 3.500 x 0.083 Butt: 3.344 In 2-28-1717 Weld Tube Yoke 1330 Ser', Fits: 3.500 x 0.083 Butt: 3.344 Inch,...
    $20.73
  • 3326-204 Weld Yokes, 1330 Series, Butt Dia 1.766", Tube Dia Wall 2.00 3326-204 Weld Yokes, 1330 Series, Butt Dia 1.766", Tube Dia Wall 2.000X0....
    $22.97

1330 Series Flange Yokes 21

All 21 in the table
  • 2-2-489 Flange Yoke 1330 Series, Holes: 4 x 0.438, Bolt Circle Dia : 2-2-489 Flange Yoke 1330 Series, Holes: 4 x 0.438, Bolt Circle Dia : 3.7...
    $19.65
  • 3302-1369 Flange Yoke 1330 Series, 2-2-1369 Ford Usually Used on Rear 3302-1369 Flange Yoke 1330 Series, 2-2-1369 Ford Usually Used on Rear End,...
    $20.58
  • 3302-1879 Flange Yoke 1330 Dodge 2-2-1879-1 Pilot: 2.162 Square Patter 3302-1879 Flange Yoke 1330 Dodge 2-2-1879-1 Pilot: 2.162 Square Pattern Bo...
    $25.97
  • 3302-949U Flange Yokes, 1330 Series, Bolt Circle Dia 3.500", Cj To Fla 3302-949U Flange Yokes, 1330 Series, Bolt Circle Dia 3.500", Cj To Flat 1....
    $26.74
  • 3302-256 Flange Yokes, 1330 Series, Bolt Circle Dia 4.250", Pilot Dia 3302-256 Flange Yokes, 1330 Series, Bolt Circle Dia 4.250", Pilot Dia 2.5...
    $31.07
  • 2-2-1879 Flange Yokes, 1330 Series, Bolt Circle Dia 3.937", Pilot Dia 2-2-1879 Flange Yokes, 1330 Series, Bolt Circle Dia 3.937", Pilot Dia 2.1...
    $31.16

1330 Series End Yokes 10

All 10 in the table
  • 3304-03 End Yoke, 1.146" Splines Dia, 1330 Series, 1.844" Hub Dia 3304-03 End Yoke, 1.146" Splines Dia, 1330 Series, 1.844" Hub Dia
    $84.72
  • 3304-261 End Yoke, 1.146" Splines Dia, 1.552" Hub Dia, 26 Spline 3304-261 End Yoke, 1.146" Splines Dia, 1.552" Hub Dia, 26 Spline
    $96.09
  • 3304-291 End Yoke, 1.276" Splines Dia, 1.750" Hub Dia, 1330 Series" 3304-291 End Yoke, 1.276" Splines Dia, 1.750" Hub Dia, 1330 Series"
    $96.14
  • 3304-29 End Yoke, 1330 Series, 1.276" Splines Dia, 1.875" Hub Dia 3304-29 End Yoke, 1330 Series, 1.276" Splines Dia, 1.875" Hub Dia
    $97.08
  • 3304-264 End Yoke, 1.146" Splines Dia, 1.552" Hub Dia, 26 Spline 3304-264 End Yoke, 1.146" Splines Dia, 1.552" Hub Dia, 26 Spline
    $107.94
  • 3304-262 End Yoke, 1.146" Splines Dia, 1.492" Hub Dia, 26 Spline 3304-262 End Yoke, 1.146" Splines Dia, 1.492" Hub Dia, 26 Spline
    $107.94

1330 Series Slip Yoke 6

All 6 in the table
  • 2-3-7961KX Slip Yoke 1330 series, Spline: 1.375x16, Center Line To End: 2-3-7961KX Slip Yoke 1330 series, Spline: 1.375x16, Center Line To End: 6 I...
    $26.41
  • 2-3-8041KX Slip Yoke 1330 Series, Splines diameter: 1.375 Splines Count 2-3-8041KX Slip Yoke 1330 Series, Splines diameter: 1.375 Splines Count:16...
    $30.86
  • 2-3-7681KX Slip Yoke 1330 Series, Splines: 1.375x15/16, Centerline To E 2-3-7681KX Slip Yoke 1330 Series, Splines: 1.375x15/16, Centerline To End:...
    $41.15
  • 3303-162 Slip Yoke, 1.375" Splines Dia, 16 Splines, Center U Joint To 3303-162 Slip Yoke, 1.375" Splines Dia, 16 Splines, Center U Joint To End...
    $43.28
  • 2-3-15651X Slip Yoke, 1330 Series, 1.338" Splines Dia, Center U Joint T 2-3-15651X Slip Yoke, 1330 Series, 1.338" Splines Dia, Center U Joint To En...
    $58.60
  • S2-3-7681KX Slip Yoke, 1330 Series, 1.375" Splines Dia, Center U Joint To En...
    $92.57

1330 Series CV Flange Yokes 6

All 6 in the table
  • P211913X Cv Flange Yoke, Ball Stud Dia 0.5", Bolt Circle Dia 4.25", B P211913X Cv Flange Yoke, Ball Stud Dia 0.5", Bolt Circle Dia 4.25", Bolt...
    $69.19
  • 211913X Cv Flange Yokes, 1330 Series, Ball Stud Dia 0.5", Bolt Circl 211913X Cv Flange Yokes, 1330 Series, Ball Stud Dia 0.5", Bolt Circle Di...
    $129.87
  • 211631X Cv Flange Yokes, 1330 Series, Ball Stud Dia 0.5", Bolt Circl 211631X Cv Flange Yokes, 1330 Series, Ball Stud Dia 0.5", Bolt Circle Di...
    $158.99
  • 211868X Cv Flange Yokes, 1330 Series, Ball Stud Dia 0.5", Bolt Circl 211868X Cv Flange Yokes, 1330 Series, Ball Stud Dia 0.5", Bolt Circle Di...
    $256.09
  • 211889X Cv Flange Yokes, 1330 Series, Ball Stud Dia 0.5", Bolt Circl 211889X Cv Flange Yokes, 1330 Series, Ball Stud Dia 0.5", Bolt Circle Di...
    $304.64
  • 211606X Cv Flange Yoke, Ball Stud Dia 0.5", Bolt Circle Dia 4", Bolt 211606X Cv Flange Yoke, Ball Stud Dia 0.5", Bolt Circle Dia 4", Bolt Hol...
    $621.00

1330 Series Ball Stud Yokes 5

All 5 in the table
  • 2-28-3067 Ball Stud Yokes, 1330 Series, Ball Stud Length Dia 0.500X0.5 2-28-3067 Ball Stud Yokes, 1330 Series, Ball Stud Length Dia 0.500X0.594,...
    $36.25
  • 2-28-2187 Ball Stud Yoke 1330 Series, Fits Tube 3.000 x 0.083, Butt Di 2-28-2187 Ball Stud Yoke 1330 Series, Fits Tube 3.000 x 0.083, Butt Dia: 2...
    $42.55
  • 2-283067 Ball Stud Yokes, 1330 Series, Ball Stud Length Dia 0.500X0.594,...
    $43.55
  • 2-28-3257 Ball Stud Yokes, 1330 Series, Ball Stud Length Dia 0.500X0.5 2-28-3257 Ball Stud Yokes, 1330 Series, Ball Stud Length Dia 0.500X0.594,...
    $44.77
  • 2-28-3447 Ball Stud Yokes, 1330 Series, Ball Stud Length Dia 0.500X0.5 2-28-3447 Ball Stud Yokes, 1330 Series, Ball Stud Length Dia 0.500X0.594,...
    $44.77

1330 Series Strap Kits 4

All 4 in the table
  • 2-70-18X Universal Joint Strap Kit 1210 / 1310 / 1330 2-70-18X Universal Joint Strap Kit 1210 / 1310 / 1330
    $6.18
  • 2-70-28X Strap Kit, Bolt Length 1.438", Bolt Torque 15 ft-lb, Center 2-70-28X Strap Kit, Bolt Length 1.438", Bolt Torque 15 ft-lb, Center To C...
    $9.71
  • 1-2024 Strap Kits, 1310, 1330 Series, Fits Cap Dia 1.062", Center T 1-2024 Strap Kits, 1310, 1330 Series, Fits Cap Dia 1.062", Center To Ce...
    $11.53
  • 1-2022 Strap Kit, Bolt Length 594", Bolt Torque 15 ft-lb, Center To 1-2022 Strap Kit, Bolt Length 594", Bolt Torque 15 ft-lb, Center To Cen...
    $12.15

1330 Series Universal Joints 4

All 4 in the table
  • 5-1330XU Universal Joint, 1330 Series Lube for Life Premium Non-Greas 5-1330XU Universal Joint, 1330 Series Lube for Life Premium Non-Greasable
    $11.74
  • 5-213X Universal Joint 1330 Series, OSR 5-213X Universal Joint 1330 Series, OSR
    $20.01
  • 5-1203X Universal Joint 1330 Series, OSR 5-1203X Universal Joint 1330 Series, OSR
    $26.46
  • 5-1330-1X Universal Joint 1330 Series, OSR 5-1330-1X Universal Joint 1330 Series, OSR
    $34.57

1330 Series Splined Sleeves & Slip Assemblies 3

All 3 in the table
  • MDS27-154 Steel Slip Assembly 1330 Series - Fits tube 3.000x0.083 MDS27-154 Steel Slip Assembly 1330 Series - Fits tube 3.000x0.083
    $63.25
  • MDS27-746 Steel Slip Assembly 1330 Series - 28 Splines X 1.100 Dia, Fi MDS27-746 Steel Slip Assembly 1330 Series - 28 Splines X 1.100 Dia, Fits t...
    $63.25
  • 2-55-278X Splined Sleeves & Slip Assemblies, 1330 Series, 3.002" Splin 2-55-278X Splined Sleeves & Slip Assemblies, 1330 Series, 3.002" Splines D...
    $159.19

1330 Series U Bolt Kits 1

All 1 in the table
  • 2-94-28X U-Bolt Fits 1210/1310/1330 U-Joints 2-94-28X U-Bolt Fits 1210/1310/1330 U-Joints
    $5.73

1330 Series Dust cap Press On & Threaded 1

All 1 in the table
  • 211158XU Dust Caps Press On, Type Round, Shaft Neck Dia 1.260, Diamet 211158XU Dust Caps Press On, Type Round, Shaft Neck Dia 1.260, Diameter 2...
    $27.30

1330 Series H Yokes 1

All 1 in the table
  • 2-26-527 H Yokes, 1330 Series, Swing Dia 4.125", Cj To Cj 2.750 2-26-527 H Yokes, 1330 Series, Swing Dia 4.125", Cj To Cj 2.750
    $46.27

1330 Series Yoke Shafts 1

All 1 in the table
  • 2-82-1961 Yoke Shafts, 1330 Series, 3.000" Splines dia, 23 Spline 2-82-1961 Yoke Shafts, 1330 Series, 3.000" Splines dia, 23 Spline
    $169.06

1330 Series Premade Driveshafts 1

All 1 in the table

1330 series questions

What size is a 1330 series u-joint?

A 1330 series universal joint has 1.062" diameter bearing caps and measures 3.625" from snap ring to snap ring (outside of cap to outside of cap). These are nominal figures; measure the caps on your old joint with a caliper to confirm the series.

Is the 1330 series the same as the 1310 or 1210?

No. The 1330 and 1310, 1210 series share the same 1.062" cap diameter but differ in width, so their yokes are not interchangeable. Use a conversion u-joint when you need to join a 1330 yoke to a yoke from a different series.

Which 1330 series parts does UDS stock?

138 1330 series parts across 16 categories: 49 transmission yokes, 23 weld yokes, 21 flange yokes, 10 end yokes, 6 slip yoke, 6 cv flange yokes and more. Everything listed in stock ships the same day from Florida when ordered before 2pm EST.

How do I match 1330 series parts on a driveshaft?

Every u-joint on the shaft must match the yokes it sits in: a 1330 series joint needs 1330 series weld yokes, slip yokes, end yokes or flange yokes (1.062" cap bores). Mixed-series shafts use a conversion joint with a different cap size on each axis.

Other u-joint series

Series designations (1310, 1350, 3R, SPL…) are Spicer® / Dana® nomenclature used across the industry and are shown for identification and cross-reference only. Dimensions are nominal; verify fitment before ordering. Copyright & trademark notice