1610 Series Driveshaft Parts
The 1610 is a medium-duty truck series with 1.625" caps, used on Class 5-7 trucks, buses and heavy equipment. Nominal 1610 dimensions: 1.625" bearing cap diameter. Measure the caps on your old joint to confirm the series before ordering.
- 1.625" Cap diameter (nominal)
- 36 Parts in stock
- 9 Categories
-
5-2-279
Flange Yoke 1610 series, 8 x .375 Holes on 6.125 BCD, 6.625 MALE...
$70.90 -
P5-2-279U
Flange Yokes, 1610 Series, Bolt Circle Dia 6.125", Cj To Flat 2....
$104.18 -
5-2-629
Flange Yokes, 1610 Series, Bolt Circle Dia 7.250", Bolt Hole Dia...
$121.08 -
P5-2-629U
Flange Yokes, 1610 Series, Bolt Circle Dia 7.250", Cj To Flat 2....
$134.21 -
6102-1582
Flange Yokes, 1610 Series, Bolt Circle Dia 5.120", Cj To Flat 3....
$147.94 -
5-2-599-1U
Flange Yokes, 1610 Series, Bolt Circle Dia 6.125", Cj To Flat 2....
$277.29
-
906256-4
Short Couple Driveshaft, 1610 (1.875 x 5.312) Series, 6.120" Cl...
$887.03
-
906224-1
Short Couple Driveshaft, 1610 (1.875 x 5.312) Series, 9.120" Fla...
$964.41
-
906224-5
Short Couple Driveshaft, 1610 (1.875 x 5.312) Series, 10.000" Fl...
$984.41
-
906224-4
Short Couple Driveshaft, 1610 (1.875 x 5.312) Series, 9.880" Fla...
$994.41
-
814119-1S
Short Couple Driveshaft, 1610 (1.875 x 5.312) Series, 12.000" Cl...
$1,109.32
-
906256-1
Short Couple Driveshaft, 1610 (1.875 x 5.312) Series, 5.380" Cl...
$1,120.03
-
5-3-2261KX
Slip Yoke, 1610 Series, 2.00" Splines Dia, Center U Joint To End...
$120.48 -
S5-3-2261KX
Slip Yoke, 1610 Series, 2.00" Splines Dia, Center U Joint To End...
$229.69
-
5-3-198KX
Slip Yoke, 1610 Series, 2.676" Splines Dia, Center U Joint To En...
$391.43
-
S5-3-3121KX
Slip Yoke, 1610 Series, 2.00" Splines Dia, Center U Joint To End...
$443.31
-
5-4-7171-1
End Yoke, 1610 Series, 1.790" splines dia, 2.188" Hub Dia"
$109.10 -
5-4-6321-1
End Yoke, 1610 Series, 1.998" Splines Dia, 2.75" Hub Dia
$119.89 -
5-4-1721-1
End Yoke, 1610 Series, 1.750" Splines Dia, 2.188" Hub Dia
$152.59
-
5-82-921U
Yoke Shafts, 1610 Series, 2.000" Splines Dia, 16 Spline
$484.18 -
5-82-961-6U
Yoke Shafts, 1610 Series, 2.000" Splines Dia, 16 Spline
$716.35
1610 series questions
What size is a 1610 series u-joint?
A 1610 series universal joint has 1.625" diameter bearing caps. These are nominal figures; measure the caps on your old joint with a caliper to confirm the series.
Which 1610 series parts does UDS stock?
36 1610 series parts across 9 categories: 13 flange yokes, 6 short couple driveshafts, 4 slip yoke, 3 end yokes, 2 u-joint lock straps & wires, 2 strap kits and more. Everything listed in stock ships the same day from Florida when ordered before 2pm EST.
How do I match 1610 series parts on a driveshaft?
Every u-joint on the shaft must match the yokes it sits in: a 1610 series joint needs 1610 series weld yokes, slip yokes, end yokes or flange yokes (1.625" cap bores). Mixed-series shafts use a conversion joint with a different cap size on each axis.
Other u-joint series
- 1310 · 1.062"
- 1350 · 1.188"
- 1410 · 1.188"
- 1330 · 1.062"
- 1480 · 1.375"
- 1550 · 1.375"
- 3R · 1.125"
- 1710 · 1.938"
- 1000
- 7260 · 1.078"
- 1810 · 2.125"
- 1251
- SPL170
- 1210 · 1.062"
- 1100
- 1760 · 1.938"
- 1751
- 7290 · 1.125"
- SPL90
- SPL250
- 1300
- 1351-20
- SPL100
- SPL140
- 2351-20
- 1330F
- 1880
- 1510
- 1500
- 2351
- 9951-22
- SPL350
- 1485
- 1310HR
- 1351-21
- 1800
- 1551-20
- 1270
- 1310WJ
- 3451
- SPL70
- 2055
- 1555
- 2351-21
Series designations (1310, 1350, 3R, SPL…) are Spicer® / Dana® nomenclature used across the industry and are shown for identification and cross-reference only. Dimensions are nominal; verify fitment before ordering. Copyright & trademark notice