1210 Series Driveshaft Parts
The 1210 uses 1.062" caps like the 1310 but with a narrower span; it appears on older passenger cars and light trucks. Nominal 1210 dimensions: 1.062" bearing cap diameter. Measure the caps on your old joint to confirm the series before ordering.
- 1.062" Cap diameter (nominal)
- 24 Parts in stock
- 11 Categories
-
2-2-899
1210 Series Nissan / Subaru Pilot: 57mm male, 2.250 Inch
$16.25 -
2-2-1049
Flange Yokes, 1210 Series, Bolt Circle Dia 3.500", Pilot Dia 2.0...
$35.44 -
P2-2-1049U
Flange Yokes, 1210 Series, Bolt Circle Dia 3.500", Cj To Flat 1....
$38.92 -
2102-221
Flange Yokes, 1210 Series, Bolt Circle Dia 2.930", Pilot Dia 2.2...
$43.84 -
2102-222
Flange Yokes, 1210 Series, Bolt Circle Dia 2.997", Pilot Dia 2.2...
$43.84 -
2102-185
Flange Yokes, 1210 Series, Bolt Circle Dia 3.307", Pilot Dia 1.8...
$44.69
-
2-3-1210KX
Slip Yoke 1210 Series, 27x68 series, Splines: 1.250x16, Centerli...
$46.93 -
2-3-9991X
Slip Yoke 1210 Series, Splines: 1.219X26/28, Centerline To End:...
$56.41
-
2-94-28X
U-Bolt Fits 1210/1310/1330 U-Joints
$5.73
-
2-70-18X
Universal Joint Strap Kit 1210 / 1310 / 1330
$6.18
-
2182-27
Yoke Shafts, 1210 Series, 1.162" Splines Dia, 27 Spline
$68.39
-
2-26-457
H Yokes, 1210 Series, Swing Dia 3.375", Cj To Cj 2.688
$83.69
-
2104-341
End Yoke, 1210 Series, 1.102" Splines Dia, 1.535" Hub Dia
$92.13
-
211342X
Cv Link Yokes, 1210 Series, Bolt Hole Dia .250-28, Ball Stud Dia...
$99.52
-
211489X
Cv Flange Yokes, 1210 Series, Ball Stud Dia 0.5", Bolt Circle Di...
$162.64
1210 series questions
What size is a 1210 series u-joint?
A 1210 series universal joint has 1.062" diameter bearing caps. These are nominal figures; measure the caps on your old joint with a caliper to confirm the series.
Is the 1210 series the same as the 1310 or 1330?
No. The 1210 and 1310, 1330 series share the same 1.062" cap diameter but differ in width, so their yokes are not interchangeable. Use a conversion u-joint when you need to join a 1210 yoke to a yoke from a different series.
Which 1210 series parts does UDS stock?
24 1210 series parts across 11 categories: 11 flange yokes, 2 universal joints, 2 weld yokes, 2 slip yoke, 1 u bolt kits, 1 strap kits and more. Everything listed in stock ships the same day from Florida when ordered before 2pm EST.
How do I match 1210 series parts on a driveshaft?
Every u-joint on the shaft must match the yokes it sits in: a 1210 series joint needs 1210 series weld yokes, slip yokes, end yokes or flange yokes (1.062" cap bores). Mixed-series shafts use a conversion joint with a different cap size on each axis.
Other u-joint series
- 1310 · 1.062"
- 1350 · 1.188"
- 1410 · 1.188"
- 1330 · 1.062"
- 1480 · 1.375"
- 1550 · 1.375"
- 3R · 1.125"
- 1710 · 1.938"
- 1000
- 1610 · 1.625"
- 7260 · 1.078"
- 1810 · 2.125"
- 1251
- SPL170
- 1100
- 1760 · 1.938"
- 1751
- 7290 · 1.125"
- SPL90
- SPL250
- 1300
- 1351-20
- SPL100
- SPL140
- 2351-20
- 1330F
- 1880
- 1510
- 1500
- 2351
- 9951-22
- SPL350
- 1485
- 1310HR
- 1351-21
- 1800
- 1551-20
- 1270
- 1310WJ
- 3451
- SPL70
- 2055
- 1555
- 2351-21
Series designations (1310, 1350, 3R, SPL…) are Spicer® / Dana® nomenclature used across the industry and are shown for identification and cross-reference only. Dimensions are nominal; verify fitment before ordering. Copyright & trademark notice