1710 Series Driveshaft Parts
The 1710 is a heavy-duty Class 7-8 truck series with 1.938" caps. It is the base of the 1710 / 1760 / 1810 family that shares many center support bearings. Nominal 1710 dimensions: 1.938" bearing cap diameter. Measure the caps on your old joint to confirm the series before ordering.
- 1.938" Cap diameter (nominal)
- 49 Parts in stock
- 9 Categories
-
6-2-739
Flange Yoke1710 Series,Holes: 8 x 0.438 Holes, Bolts Circle Diam...
$102.66 -
P6-2-749U
Flange Yokes, 1710 Series, Bolt Circle Dia 7.250", Cj To Flat 3....
$116.23 -
6-2-749
Flange Yoke 1710 Series 8 Holes Bolt holes Diameter 0.375 CJ TO...
$120.41 -
P6-2-739U
Flange Yokes, 1710 Series, Bolt Circle Dia 7.250", Cj To Flat 3....
$131.92 -
6-2-779
Flange Yoke 1710 Series,Holes: 12 x 0.438 Holes, Bolts Circle Di...
$132.36 -
6-2-25U
Flange Yokes, 1710 Series, Bolt Circle Dia 5.906", Cj To Flat 3....
$158.37
-
904657-5
Short Couple Driveshaft, 1710 (1.938 x 6.094) Series, 11.620" Fl...
$917.51
-
904657-4
Short Couple Driveshaft, 1710 (1.938 x 6.094) Series, 11.380" Fl...
$921.51
-
904657-12
Short Couple Driveshaft, 1710 (1.938 x 6.094) Series, 13.380" Fl...
$927.51
-
904657-8
Short Couple Driveshaft, 1710 (1.938 x 6.094) Series, 12.380" Fl...
$947.81
-
904657-9
Short Couple Driveshaft, 1710 (1.938 x 6.094) Series, 12.620" Fl...
$951.50
-
904657-1
Short Couple Driveshaft, 1710 (1.938 x 6.094) Series, 10.620" Fl...
$997.51
-
6-4-7481-1
End Yoke, 2.390" Splines Dia, 2.875" Hub Dia, 46 Spline
$108.34 -
6-4-1981
End Yoke, 1710 Series, 1.960" Splines Dia, 2.812" Hub Dia
$116.17 -
6-4-4601
End Yoke, 1710 Series, 2.350" Splines Dia, 3.312" Hub Dia
$127.51 -
6-4-7141-1
End Yoke, 1710 Series, 1.998" Splines Dia, 2.810" Hub Dia
$129.32 -
6-4-4601-1
End Yoke, 1710 Series, 2.35" Splines dia, 3.312" Hub Dia
$147.92 -
6-4-7631-1X
End Yoke 1710HR Differential Yoke
$185.14
-
6-3-2671KX
Slip Yoke 1710 Ser', Splines: 2.500 x 16 Center U Joint To End 9...
$99.26 -
S6-3-3441KX
Slip Yoke, 1710 Series, 2.500" Splines Dia, 16 Spline
$119.90
-
6-3-2651KX
Slip Yoke, 1710 Series, 2.500" Splines Dia, 16 Spline CL To End:...
$127.35 -
S6-3-2671KX
Slip Yoke, 1710 Series, 2.500" Splines Dia, Center U Joint To En...
$205.48
-
S6-3-2651KX
Slip Yoke, 1710 Series, 2.500" Splines Dia, 16 Spline
$209.09
-
6-3-3441KX
Slip Yoke, 1710 Series, 2.500" Splines Dia, 16 Spline
$241.27
-
6.5-70-18X
Universal Joint Strap Kit 1710 / 1760 / 1810
$15.78 -
1-1946
Strap Kit, Bolt Length 1", Bolt Torque 125 ft-lb, Center To Cent...
$17.01
-
231351-1U
U-Joint Lock Straps & Wires, Series 1710
$3.81
-
6-82-1341-7
Yoke Shafts, 1710 Series, 2.500" Splines Dia, 16 Spline
$314.11
1710 series questions
What size is a 1710 series u-joint?
A 1710 series universal joint has 1.938" diameter bearing caps. These are nominal figures; measure the caps on your old joint with a caliper to confirm the series.
Is the 1710 series the same as the 1760?
No. The 1710 and 1760 series share the same 1.938" cap diameter but differ in width, so their yokes are not interchangeable. Use a conversion u-joint when you need to join a 1710 yoke to a yoke from a different series.
Which 1710 series parts does UDS stock?
49 1710 series parts across 9 categories: 19 flange yokes, 8 short couple driveshafts, 7 end yokes, 6 slip yoke, 3 weld yokes, 2 strap kits and more. Everything listed in stock ships the same day from Florida when ordered before 2pm EST.
How do I match 1710 series parts on a driveshaft?
Every u-joint on the shaft must match the yokes it sits in: a 1710 series joint needs 1710 series weld yokes, slip yokes, end yokes or flange yokes (1.938" cap bores). Mixed-series shafts use a conversion joint with a different cap size on each axis.
Other u-joint series
- 1310 · 1.062"
- 1350 · 1.188"
- 1410 · 1.188"
- 1330 · 1.062"
- 1480 · 1.375"
- 1550 · 1.375"
- 3R · 1.125"
- 1000
- 1610 · 1.625"
- 7260 · 1.078"
- 1810 · 2.125"
- 1251
- SPL170
- 1210 · 1.062"
- 1100
- 1760 · 1.938"
- 1751
- 7290 · 1.125"
- SPL90
- SPL250
- 1300
- 1351-20
- SPL100
- SPL140
- 2351-20
- 1330F
- 1880
- 1510
- 1500
- 2351
- 9951-22
- SPL350
- 1485
- 1310HR
- 1351-21
- 1800
- 1551-20
- 1270
- 1310WJ
- 3451
- SPL70
- 2055
- 1555
- 2351-21
Series designations (1310, 1350, 3R, SPL…) are Spicer® / Dana® nomenclature used across the industry and are shown for identification and cross-reference only. Dimensions are nominal; verify fitment before ordering. Copyright & trademark notice