零件号 3504-291 (也写作 3504/291) 端叉, 花键直径 1.276", 轮毂直径 1.710", 1350系列"
现货1 件准备发货
大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。
- 配件订单满 $ 免运费1,000
- 14天退货
- 适配咨询: (813) 524-6491
规格 3504-291 · 1350 Series End Yoke
- 零件编号
- 3504-291
- 零件类型
- 端叉
- 状态
- 全新
- 系列
- 1350
- 样式
- BS
- 花键数
- 29
- 花键直径
- 1.276
- 通孔
- 1.500"
- 轮毂直径
- 1.710"
- 万向节到端部
- 3.188
- 孔类型
- splined
- 重量
- 2.4 lb
适配性
NUT: 16-74-101, STRAP: 3-70-28, STUB: 3153-291
1350 系列零件使用 1.188" 万向节轴承盖,卡簧到卡簧宽度为 3.625" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。
按您的邮编估算运费
计算运费
从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。
佛罗里达州本地自提 — 免费
关于 3504-291
When comparing aftermarket end yokes, what matters is dimensional precision and material consistency -- not packaging or price point. The 3504-291 from UDS is built to the 1350 Series OEM specification: 1.276" spline bore, 1.710" hub diameter, and BS snap ring retention. These numbers are non-negotiable -- they either match your output shaft or they don't.
OEM vs. Aftermarket: What Changes
OEM end yokes are manufactured to tight tolerances with controlled heat treatment for the specific vehicle model. The UDS 3504-291 replicates these tolerances in an aftermarket context, using the same 1350 Series dimensional standard that OEM suppliers use. The practical difference is availability: this part ships from Universal Driveshafts' inventory, while OEM sources may require dealer ordering with extended lead times.
- Spline interface: 1.276" x 29 splines -- matches OEM output shaft
- Snap ring type: BS -- same retention method as factory
- Hub diameter: 1.710" -- registers against factory seal bore
- Note: NUT: 16-74-101
| Specification | Value |
|---|---|
| Series | 1350 Series |
| Spline Diameter | 1.276" |
| Spline Count | 29 |
| Hub Diameter | 1.710" |
| Center U-Joint to End | 3.188" |
| Through Hole Diameter | 1.500" |
| Snap Ring Style | BS |
| Application Note | NUT: 16-74-101 |
| Brand | UDS |
Specification Table
Full dimensional data for the 3504-291. Every measurement is an as-machined figure, not a nominal or nominal +/- value.
Selecting the Correct Part
The most common ordering error for end yokes is confusing similar-sounding series numbers or assuming that all yokes for a given vehicle are interchangeable. Verify these specifics before ordering the 3504-291: output shaft spline diameter must be 1.276", spline count must be 29, and the shaft's snap ring groove must match the BS style. Through bore clearance (1.500") is especially important if your application routes a cable or shaft through the output yoke bore.
Part 3504-291 is a UDS product. Universal Driveshafts stocks a complete range of 1350 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.
New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.
1350 系列中相关的 端叉
查看完整表格
3504-04
端叉, 花键直径 1.312", 轮毂直径 2.110", 30 花键
$114.87现货
3504-09
端叉, 1350系列, 花键直径 1.343", 轮毂直径 1.812"
$121.02现货
N3-4-JK08
端叉, 1350系列, 花键直径 1.250", 轮毂直径 1.85"
$111.55现货
3504-03
端叉, 1350系列, 花键直径 1.343", 轮毂直径 1.812"
$102.26现货
3504-101
端叉, 1350系列, 花键直径 1.375", 轮毂直径 1.750"
$118.59现货
3504-85
端叉, 1350系列, 花键直径 1.312", 轮毂直径 1.94"
$108.75现货
3504-10
端叉, 1350系列, 花键直径 1.188", 轮毂直径 1.875""
$121.07现货
3504-243
端叉, 1350系列, 花键直径 1.250", 轮毂直径 1.876"
$107.73现货
3504-291 问题
3504-291 属于哪个系列?
3504-291 是 1350 系列 端叉。1350 系列标称尺寸为 1.188" 轴承盖,卡簧到卡簧宽度为 3.625". 订购前请测量旧万向节的轴承盖直径以确认系列。
3504-291 有多少个花键齿?
3504-291 在 1.276" 花键直径上有 29 个花键。 请清点输出轴上的花键并测量大径以确认。
3504-291 有现货吗?
是的。佛罗里达仓库有 1 件现货。工作日美东标准时间(EST)下午2点前下的订单大多当天发货。