部品番号 3504-291 (別表記 3504/291) エンドヨーク, スプライン径 1.276", ハブ径 1.710", 1350シリーズ"
在庫あり1 件の出荷準備完了
在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。
- 部品注文の送料無料金額 $1,000
- 14日以内返品可能
- 適合に関するサポート: (813) 524-6491
仕様 3504-291 · 1350 Series End Yoke
- 部品番号
- 3504-291
- パーツタイプ
- エンドヨーク
- 状態
- 新品
- シリーズ
- 1350
- スタイル
- BS
- スプライン数
- 29
- スプライン径
- 1.276
- 通し穴
- 1.500"
- ハブ径
- 1.710"
- ユニバーサルジョイントから端部まで
- 3.188
- ボアタイプ
- splined
- 重量
- 2.4 lb
適合性
NUT: 16-74-101, STRAP: 3-70-28, STUB: 3153-291
1350 シリーズのパーツには 1.188" ユニバーサルジョイントのベアリングキャップを使用します スナップリング間幅 3.625" (公称)。ご注文前に、相手側のヨークまたはジョイントのキャップ径をご確認ください。
郵便番号への送料を見積もる
送料を計算
フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。
フロリダでの店頭受取 — 無料
3504-291 について
When comparing aftermarket end yokes, what matters is dimensional precision and material consistency -- not packaging or price point. The 3504-291 from UDS is built to the 1350 Series OEM specification: 1.276" spline bore, 1.710" hub diameter, and BS snap ring retention. These numbers are non-negotiable -- they either match your output shaft or they don't.
OEM vs. Aftermarket: What Changes
OEM end yokes are manufactured to tight tolerances with controlled heat treatment for the specific vehicle model. The UDS 3504-291 replicates these tolerances in an aftermarket context, using the same 1350 Series dimensional standard that OEM suppliers use. The practical difference is availability: this part ships from Universal Driveshafts' inventory, while OEM sources may require dealer ordering with extended lead times.
- Spline interface: 1.276" x 29 splines -- matches OEM output shaft
- Snap ring type: BS -- same retention method as factory
- Hub diameter: 1.710" -- registers against factory seal bore
- Note: NUT: 16-74-101
| Specification | Value |
|---|---|
| Series | 1350 Series |
| Spline Diameter | 1.276" |
| Spline Count | 29 |
| Hub Diameter | 1.710" |
| Center U-Joint to End | 3.188" |
| Through Hole Diameter | 1.500" |
| Snap Ring Style | BS |
| Application Note | NUT: 16-74-101 |
| Brand | UDS |
Specification Table
Full dimensional data for the 3504-291. Every measurement is an as-machined figure, not a nominal or nominal +/- value.
Selecting the Correct Part
The most common ordering error for end yokes is confusing similar-sounding series numbers or assuming that all yokes for a given vehicle are interchangeable. Verify these specifics before ordering the 3504-291: output shaft spline diameter must be 1.276", spline count must be 29, and the shaft's snap ring groove must match the BS style. Through bore clearance (1.500") is especially important if your application routes a cable or shaft through the output yoke bore.
Part 3504-291 is a UDS product. Universal Driveshafts stocks a complete range of 1350 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.
New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.
1350 シリーズの関連する エンドヨーク
全一覧表を見る
3504-04
エンドヨーク, スプライン径 1.312", ハブ径 2.110", 30 スプライン
$114.87在庫あり
3504-09
エンドヨーク, 1350シリーズ, スプライン径 1.343", ハブ径 1.812"
$121.02在庫あり
N3-4-JK08
エンドヨーク, 1350シリーズ, スプライン径 1.250", ハブ径 1.85"
$111.55在庫あり
3504-03
エンドヨーク, 1350シリーズ, スプライン径 1.343", ハブ径 1.812"
$102.26在庫あり
3504-101
エンドヨーク, 1350シリーズ, スプライン径 1.375", ハブ径 1.750"
$118.59在庫あり
3504-85
エンドヨーク, 1350シリーズ, スプライン径 1.312", ハブ径 1.94"
$108.75在庫あり
3504-10
エンドヨーク, 1350シリーズ, スプライン径 1.188", ハブ径 1.875""
$121.07在庫あり
3504-243
エンドヨーク, 1350シリーズ, スプライン径 1.250", ハブ径 1.876"
$107.73在庫あり
3504-291 ご質問
3504-291 はどのシリーズですか?
3504-291 は 1350 シリーズの エンドヨーク です。 1350 シリーズの公称寸法は 1.188" ベアリングキャップです スナップリング間幅 3.625"。ご注文前に、古いジョイントのキャップ径を測ってシリーズをご確認ください。
3504-291 のスプライン数はいくつですか?
3504-291 はスプライン径 1.276" に 29 スプラインを備えています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。
3504-291 の在庫はありますか?
はい。フロリダ州に 1 点の在庫がございます。平日の東部標準時(EST)午後2時までのご注文の多くは、当日中に発送いたします。