零件号 3104-242 (也写作 3104/242) 端叉, 花键直径 1.250", 轮毂直径 1.876", 24 花键
现货1 件准备发货
大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。
- 配件订单满 $ 免运费1,000
- 14天退货
- 适配咨询: (813) 524-6491
规格 3104-242 · 1310 Series End Yoke
- 零件编号
- 3104-242
- 零件类型
- 端叉
- 状态
- 全新
- 系列
- 1310
- 样式
- UB
- 通孔
- 1.500"
- 万向节到端部
- 3.000"
- 轮毂直径
- 1.876
- 花键数
- 24
- 花键直径
- 1.250"
- 孔类型
- splined
- 重量
- 2.4 lb
适配性
07+ JEEP JK FOR DIFFERENTIAL
1310 系列零件使用 1.062" 万向节轴承盖,卡簧到卡簧宽度为 3.219" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。
互换 / 交叉参考
- 3104-242-01
- N2-4-JK02
3104-242 可替换或互换自 3104-242-01, N2-4-JK02. 交叉参考编号仅供识别;购买替代件前,请先比对上方的系列、花键和螺栓孔距尺寸。
按您的邮编估算运费
计算运费
从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。
佛罗里达州本地自提 — 免费
关于 3104-242
Not all end yokes are created equal -- the material and machining process determine whether a yoke lasts 200,000 miles or fails in 20,000. The 3104-242 is a UDS 1310 Series end yoke manufactured from high-grade steel with machined spline bores, precision bearing seats, and controlled snap ring grooves. It is the correct choice for any drivetrain that demands durability over the long haul.
Material and Construction
The raw material for this yoke is selected for its combination of tensile strength and machinability. After rough forming, the spline bore, hub, and bearing seats are finish-machined on CNC equipment to hold tolerances that exceed OEM specifications. The UB snap ring groove is cut to a consistent depth and width, ensuring that the snap ring seats fully and cannot back out under vibration.
- High-grade steel construction -- resists deformation under high-torque loads
- CNC-machined bearing bores -- consistent, round seats for U-joint caps
- Controlled spline form -- 1.250" diameter, 24-spline interface
- Protective coating -- resists corrosion during storage and service life
| Specification | Value |
|---|---|
| Series | 1310 Series |
| Spline Diameter | 1.250" |
| Spline Count | 24 |
| Hub Diameter | 1.876" |
| Center U-Joint to End | 3.000" |
| Through Hole Diameter | 1.500" |
| Snap Ring Style | UB |
| Application Note | 07+ JEEP JK FOR DIFFERENTIAL |
| Brand | UDS |
Dimensional Reference
Every dimension on this yoke has a functional purpose. The 1.876" hub diameter determines how the yoke registers against the output shaft seal or retainer. The 3.000" center-to-end measurement affects driveshaft operating length. The 1.500" through hole prevents interference with internal shafts or speedometer cables. None of these dimensions can be ignored when selecting a replacement.
Application and Installation
This yoke is designed for 07+ JEEP JK FOR DIFFERENTIAL. Installation requires a clean output shaft free of nicks, corrosion, or damaged splines. Inspect the snap ring groove in the shaft before installing the new yoke. Torque the retaining hardware to specification -- do not rely on thread friction alone to retain the yoke under high-RPM operation.
Pair with a fresh 1310 Series U-joint for a complete driveline service. Reusing an old U-joint with a new yoke negates the benefits of the replacement.
Part 3104-242 is a UDS product. Universal Driveshafts stocks a complete range of 1310 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.
New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.
1310 系列中相关的 端叉
查看完整表格
3104-26CV
端叉, 1310系列, 26 花键, 型式 CV
$48.27现货
3104-05
端叉, 花键直径 1.188", 1310系列, 轮毂直径 1.521"
$84.60现货
3104-231
端叉, 花键直径 1.26", 轮毂直径 1.562", 23 花键
$104.94现货
3104-02
端叉, 花键直径 1.146", 轮毂直径 1.844", 26 花键
$99.17现货
2-4-0523
端叉, 1310系列, 轮毂直径 2.125", 2.562" 万向节中心至端部
$43.88现货
2-4-1233
端叉 - 圆孔 1310系列, 1.500 孔键槽: 0.375, 轮毂 Diameter: 2.125
$18.91现货
N2-4-JK06
端叉, 花键直径 1.25", 轮毂直径 1.85", 24 花键
$115.63现货
3104-321CV
端叉 CV Conversion To 1310 Jeep JK NP241 07-18, counterbore by nut 适...
$42.66现货
3104-242 问题
3104-242 属于哪个系列?
3104-242 是 1310 系列 端叉。1310 系列标称尺寸为 1.062" 轴承盖,卡簧到卡簧宽度为 3.219". 订购前请测量旧万向节的轴承盖直径以确认系列。
3104-242 有多少个花键齿?
3104-242 在 1.250" 花键直径上有 24 个花键。 请清点输出轴上的花键并测量大径以确认。
3104-242 可替代哪些零件号?
3104-242 交叉对应于 3104-242-01, N2-4-JK02. 互换数据仅供参考;替代前请比对尺寸。
3104-242 有现货吗?
是的。佛罗里达仓库有 1 件现货。工作日美东标准时间(EST)下午2点前下的订单大多当天发货。