部品番号 3104-242 (別表記 3104/242) エンドヨーク, スプライン径 1.250", ハブ径 1.876", 24 スプライン
在庫あり1 件の出荷準備完了
在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。
- 部品注文の送料無料金額 $1,000
- 14日以内返品可能
- 適合に関するサポート: (813) 524-6491
仕様 3104-242 · 1310 Series End Yoke
- 部品番号
- 3104-242
- パーツタイプ
- エンドヨーク
- 状態
- 新品
- シリーズ
- 1310
- スタイル
- UB
- 通し穴
- 1.500"
- ユニバーサルジョイントから端部まで
- 3.000"
- ハブ径
- 1.876
- スプライン数
- 24
- スプライン径
- 1.250"
- ボアタイプ
- splined
- 重量
- 2.4 lb
適合性
07+ JEEP JK FOR DIFFERENTIAL
1310 シリーズのパーツには 1.062" ユニバーサルジョイントのベアリングキャップを使用します スナップリング間幅 3.219" (公称)。ご注文前に、相手側のヨークまたはジョイントのキャップ径をご確認ください。
互換品 / クロスレファレンス
- 3104-242-01
- N2-4-JK02
3104-242 は 3104-242-01, N2-4-JK02 と互換性があります。相互参照番号は識別用です。交換前に、上記のシリーズ、スプライン、ボルトパターンの寸法をご確認ください。
郵便番号への送料を見積もる
送料を計算
フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。
フロリダでの店頭受取 — 無料
3104-242 について
Not all end yokes are created equal -- the material and machining process determine whether a yoke lasts 200,000 miles or fails in 20,000. The 3104-242 is a UDS 1310 Series end yoke manufactured from high-grade steel with machined spline bores, precision bearing seats, and controlled snap ring grooves. It is the correct choice for any drivetrain that demands durability over the long haul.
Material and Construction
The raw material for this yoke is selected for its combination of tensile strength and machinability. After rough forming, the spline bore, hub, and bearing seats are finish-machined on CNC equipment to hold tolerances that exceed OEM specifications. The UB snap ring groove is cut to a consistent depth and width, ensuring that the snap ring seats fully and cannot back out under vibration.
- High-grade steel construction -- resists deformation under high-torque loads
- CNC-machined bearing bores -- consistent, round seats for U-joint caps
- Controlled spline form -- 1.250" diameter, 24-spline interface
- Protective coating -- resists corrosion during storage and service life
| Specification | Value |
|---|---|
| Series | 1310 Series |
| Spline Diameter | 1.250" |
| Spline Count | 24 |
| Hub Diameter | 1.876" |
| Center U-Joint to End | 3.000" |
| Through Hole Diameter | 1.500" |
| Snap Ring Style | UB |
| Application Note | 07+ JEEP JK FOR DIFFERENTIAL |
| Brand | UDS |
Dimensional Reference
Every dimension on this yoke has a functional purpose. The 1.876" hub diameter determines how the yoke registers against the output shaft seal or retainer. The 3.000" center-to-end measurement affects driveshaft operating length. The 1.500" through hole prevents interference with internal shafts or speedometer cables. None of these dimensions can be ignored when selecting a replacement.
Application and Installation
This yoke is designed for 07+ JEEP JK FOR DIFFERENTIAL. Installation requires a clean output shaft free of nicks, corrosion, or damaged splines. Inspect the snap ring groove in the shaft before installing the new yoke. Torque the retaining hardware to specification -- do not rely on thread friction alone to retain the yoke under high-RPM operation.
Pair with a fresh 1310 Series U-joint for a complete driveline service. Reusing an old U-joint with a new yoke negates the benefits of the replacement.
Part 3104-242 is a UDS product. Universal Driveshafts stocks a complete range of 1310 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.
New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.
1310 シリーズの関連する エンドヨーク
全一覧表を見る
3104-26CV
エンドヨーク, 1310シリーズ, 26 スプライン, スタイル CV
$48.27在庫あり
3104-05
エンドヨーク, スプライン径 1.188", 1310シリーズ, ハブ径 1.521"
$84.60在庫あり
3104-231
エンドヨーク, スプライン径 1.26", ハブ径 1.562", 23 スプライン
$104.94在庫あり
3104-02
エンドヨーク, スプライン径 1.146", ハブ径 1.844", 26 スプライン
$99.17在庫あり
2-4-0523
エンドヨーク, 1310シリーズ, ハブ径 2.125", 2.562" ジョイント・エンド間
$43.88在庫あり
2-4-1233
エンドヨーク - 丸穴 1310シリーズ, 1.500 内径キー溝: 0.375, ハブ Diamet...
$18.91在庫あり
N2-4-JK06
エンドヨーク, スプライン径 1.25", ハブ径 1.85", 24 スプライン
$115.63在庫あり
3104-321CV
エンドヨーク CV Conversion To 1310 Jeep JK NP241 07-18, counterbore by...
$42.66在庫あり
3104-242 ご質問
3104-242 はどのシリーズですか?
3104-242 は 1310 シリーズの エンドヨーク です。 1310 シリーズの公称寸法は 1.062" ベアリングキャップです スナップリング間幅 3.219"。ご注文前に、古いジョイントのキャップ径を測ってシリーズをご確認ください。
3104-242 のスプライン数はいくつですか?
3104-242 はスプライン径 1.250" に 24 スプラインを備えています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。
3104-242 はどの部品番号の代替品ですか?
3104-242 は 3104-242-01, N2-4-JK02 とクロスリファレンス対応しています。互換データは参考情報です。交換前に寸法をご確認ください。
3104-242 の在庫はありますか?
はい。フロリダ州に 1 点の在庫がございます。平日の東部標準時(EST)午後2時までのご注文の多くは、当日中に発送いたします。