3104-242 1310 Series End Yoke

N.º de parte 3104-242 (también escrito 3104/242) Yugo de extremo, Diám. de estrías 1.250", Diám. de cubo 1.876", 24 estrías

$70.54

En stock1 listos para enviar

La mayoría de las piezas en stock salen el mismo día si se piden antes de las 2pm EST; los tiempos de procesamiento pueden variar.

  • Envío gratis en pedidos de piezas de más de $1,000
  • Devoluciones en 14 días
  • Ayuda con la compatibilidad: (813) 524-6491

Especificaciones 3104-242 · 1310 Series End Yoke

Cómo medirSeñala una letra para ver su medida
ABCFGED
Número de pieza
3104-242
Tipo de pieza
Yugo de extremo
Condición
Nuevo
Serie
1310
Estilo
UB
Agujero pasante
1.500"
Cruceta a extremo
3.000"
Diám. de cubo
1.876
Cantidad de estrías
24
Diám. de estrías
1.250"
Tipo de orificio
splined
Peso
2.4 lb

Compatibilidad

07+ JEEP JK FOR DIFFERENTIAL

Las piezas de serie 1310 usan copas de rodamiento de cruceta de 1.062" con un ancho de 3.219" de anillo a anillo (nominal). Confirma el diámetro de copa en el yugo o la cruceta que acopla antes de comprar.

Intercambio / referencia cruzada

  • 3104-242-01
  • N2-4-JK02

3104-242 reemplaza o intercambia con 3104-242-01, N2-4-JK02. Los números de referencia cruzada son para identificación; compara la serie, las estrías y el patrón de pernos de arriba antes de sustituir.

Calcula el envío a tu código postal

Calcular envío

Tarifas UPS en vivo desde nuestro taller en Florida. Los pedidos de piezas de más de $1,000 tienen envío gratis; el tubo y los cardanes completos siempre se envían con la tarifa UPS.

Retiro en tienda en Florida: gratis

Acerca de 3104-242

Not all end yokes are created equal -- the material and machining process determine whether a yoke lasts 200,000 miles or fails in 20,000. The 3104-242 is a UDS 1310 Series end yoke manufactured from high-grade steel with machined spline bores, precision bearing seats, and controlled snap ring grooves. It is the correct choice for any drivetrain that demands durability over the long haul.

Material and Construction

The raw material for this yoke is selected for its combination of tensile strength and machinability. After rough forming, the spline bore, hub, and bearing seats are finish-machined on CNC equipment to hold tolerances that exceed OEM specifications. The UB snap ring groove is cut to a consistent depth and width, ensuring that the snap ring seats fully and cannot back out under vibration.

  • High-grade steel construction -- resists deformation under high-torque loads
  • CNC-machined bearing bores -- consistent, round seats for U-joint caps
  • Controlled spline form -- 1.250" diameter, 24-spline interface
  • Protective coating -- resists corrosion during storage and service life
Specification Value
Series 1310 Series
Spline Diameter 1.250"
Spline Count 24
Hub Diameter 1.876"
Center U-Joint to End 3.000"
Through Hole Diameter 1.500"
Snap Ring Style UB
Application Note 07+ JEEP JK FOR DIFFERENTIAL
Brand UDS

Dimensional Reference

Every dimension on this yoke has a functional purpose. The 1.876" hub diameter determines how the yoke registers against the output shaft seal or retainer. The 3.000" center-to-end measurement affects driveshaft operating length. The 1.500" through hole prevents interference with internal shafts or speedometer cables. None of these dimensions can be ignored when selecting a replacement.

Application and Installation

This yoke is designed for 07+ JEEP JK FOR DIFFERENTIAL. Installation requires a clean output shaft free of nicks, corrosion, or damaged splines. Inspect the snap ring groove in the shaft before installing the new yoke. Torque the retaining hardware to specification -- do not rely on thread friction alone to retain the yoke under high-RPM operation.

Pair with a fresh 1310 Series U-joint for a complete driveline service. Reusing an old U-joint with a new yoke negates the benefits of the replacement.

Part 3104-242 is a UDS product. Universal Driveshafts stocks a complete range of 1310 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.

New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.

Yugos de extremo relacionados de la serie 1310

Ver la tabla completa

3104-242 preguntas

¿De qué serie es 3104-242?

3104-242 pertenece a la serie 1310 (Yugo de extremo). Las dimensiones nominales de la serie 1310 son copas de 1.062" con un ancho de 3.219" de anillo a anillo. Mide el diámetro de copa de tu cruceta vieja para confirmar la serie antes de comprar.

¿Cuántas estrías tiene 3104-242?

3104-242 tiene 24 estrías en un diámetro de estrías de 1.250". Cuenta las estrías del eje de salida y mide el diámetro mayor para confirmar.

¿Qué números de parte reemplaza 3104-242?

3104-242 tiene referencia cruzada con 3104-242-01, N2-4-JK02. Los datos de intercambio son de referencia; compara las dimensiones antes de sustituir.

¿Hay 3104-242 en existencia?

Sí. Hay 1 en existencia en Florida. La mayoría de los pedidos hechos antes de las 2 p. m. EST en día hábil salen el mismo día.

Esta traducción fue hecha con IA y puede contener errores. Si algo no queda claro, llame al (813) 524-6491 o cambie a inglés.