Part No. 3104-242 (also written 3104/242) End Yoke, 1.250" Splines Dia, 1.876" Hub Dia, 24 Spline
In stock1 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 3104-242 · 1310 Series End Yoke
- Part number
- 3104-242
- Part type
- End Yoke
- Condition
- New
- Series
- 1310
- Style
- UB
- Through hole
- 1.500"
- CJ to end
- 3.000"
- Hub diameter
- 1.876
- Splines count
- 24
- Splines diameter
- 1.250"
- Bore type
- splined
- Weight
- 2.4 lb
Fitment
07+ JEEP JK FOR DIFFERENTIAL
1310 series parts use 1.062" u-joint bearing caps on a 3.219" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Interchange / cross-reference
- 3104-242-01
- N2-4-JK02
3104-242 replaces or interchanges with 3104-242-01, N2-4-JK02. Cross-reference numbers are supplied for identification; compare the series, spline and bolt-pattern dimensions above before substituting.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 3104-242
Not all end yokes are created equal -- the material and machining process determine whether a yoke lasts 200,000 miles or fails in 20,000. The 3104-242 is a UDS 1310 Series end yoke manufactured from high-grade steel with machined spline bores, precision bearing seats, and controlled snap ring grooves. It is the correct choice for any drivetrain that demands durability over the long haul.
Material and Construction
The raw material for this yoke is selected for its combination of tensile strength and machinability. After rough forming, the spline bore, hub, and bearing seats are finish-machined on CNC equipment to hold tolerances that exceed OEM specifications. The UB snap ring groove is cut to a consistent depth and width, ensuring that the snap ring seats fully and cannot back out under vibration.
- High-grade steel construction -- resists deformation under high-torque loads
- CNC-machined bearing bores -- consistent, round seats for U-joint caps
- Controlled spline form -- 1.250" diameter, 24-spline interface
- Protective coating -- resists corrosion during storage and service life
| Specification | Value |
|---|---|
| Series | 1310 Series |
| Spline Diameter | 1.250" |
| Spline Count | 24 |
| Hub Diameter | 1.876" |
| Center U-Joint to End | 3.000" |
| Through Hole Diameter | 1.500" |
| Snap Ring Style | UB |
| Application Note | 07+ JEEP JK FOR DIFFERENTIAL |
| Brand | UDS |
Dimensional Reference
Every dimension on this yoke has a functional purpose. The 1.876" hub diameter determines how the yoke registers against the output shaft seal or retainer. The 3.000" center-to-end measurement affects driveshaft operating length. The 1.500" through hole prevents interference with internal shafts or speedometer cables. None of these dimensions can be ignored when selecting a replacement.
Application and Installation
This yoke is designed for 07+ JEEP JK FOR DIFFERENTIAL. Installation requires a clean output shaft free of nicks, corrosion, or damaged splines. Inspect the snap ring groove in the shaft before installing the new yoke. Torque the retaining hardware to specification -- do not rely on thread friction alone to retain the yoke under high-RPM operation.
Pair with a fresh 1310 Series U-joint for a complete driveline service. Reusing an old U-joint with a new yoke negates the benefits of the replacement.
Part 3104-242 is a UDS product. Universal Driveshafts stocks a complete range of 1310 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.
New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.
Related End Yokes in the 1310 series
See the full table
3104-26CV
End Yoke, 1310 Series, 26 Splines, Style CV
$48.27In stock
3104-05
End Yoke, 1.188" Splines Dia, 1310 Series, 1.521" Hub Dia
$84.60In stock
3104-231
End Yoke, 1.26" Splines Dia, 1.562" Hub Dia, 23 Spline
$104.94In stock
3104-02
End Yoke, 1.146" Splines Dia, 1.844" Hub Dia, 26 Spline
$99.17In stock
2-4-0523
End Yoke, 1310 Series, 2.125" Hub Dia, 2.562" Cj To End
$43.88In stock
2-4-1233
End Yoke - Round Bore 1310 Series, 1.500 Bore KEYWAY: 0.375, Hub Diame...
$18.91In stock
N2-4-JK06
End Yoke, 1.25" Splines dia, 1.85" Hub Dia, 24 Spline
$115.63In stock
3104-321CV
End Yoke CV Conversion To 1310 Jeep JK NP241 07-18, counterbore by nut...
$42.66In stock
3104-242 questions
What series is 3104-242?
3104-242 is a 1310 series end yoke. Nominal 1310 dimensions are 1.062" bearing caps on a 3.219" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What spline count does 3104-242 have?
3104-242 has 24 splines on a 1.250" spline diameter. Count the splines on the output shaft and measure across the major diameter to confirm.
What part numbers does 3104-242 replace?
3104-242 cross-references to 3104-242-01, N2-4-JK02. Interchange data is for reference; compare the dimensions before substituting.
Is 3104-242 in stock?
Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.