1340-21 Stub Shaft
Slip

N.º de parte 1340-21 (también escrito 1340/21) Eje intermedio (stub), 20 X 1.310 estrías, Diám. de asiento 2.435", Diám. × pared de tubo 2.560x0.065

$73.13

En stock1 listos para enviar

La mayoría de las piezas en stock salen el mismo día si se piden antes de las 2pm EST; los tiempos de procesamiento pueden variar.

  • Envío gratis en pedidos de piezas de más de $1,000
  • Devoluciones en 14 días
  • Ayuda con la compatibilidad: (813) 524-6491

Especificaciones 1340-21 · Stub Shaft

Cómo medirSeñala una letra para ver su medida
EBADFC
Número de pieza
1340-21
Tipo de pieza
Stub Shaft
Condición
Nuevo
Estilo
Slip
Pared de tubo
0.065"
Diámetro de asiento
2.435
Cantidad y diám. de estrías
20 X 1.310
Extremo a soldadura
6.375
Largo de estrías
1.880
Diámetro de tubo
2.560
Peso
3.59 lb

Compatibilidad

TOYOTA

Calcula el envío a tu código postal

Calcular envío

Tarifas UPS en vivo desde nuestro taller en Florida. Los pedidos de piezas de más de $1,000 tienen envío gratis; el tubo y los cardanes completos siempre se envían con la tarifa UPS.

Retiro en tienda en Florida: gratis

Acerca de 1340-21

A failed midship shaft announces itself as vibration that worsens at highway speed and does not disappear after U-joint replacement. The 1340-21 stub midship shaft -- 20 X 1.310 splines, 2.435" butt, 2.560" x 0.065" tube -- provides a precision replacement that restores the dimensional accuracy required for a vibration-free two-piece driveshaft.

Midship Shaft Failure Modes

Stub midship shafts fail for several reasons: center support bearing collapse allows tube deflection; corrosion attacks the tube wall, reducing structural stiffness; and impact damage introduces runout that unbalances the entire driveshaft assembly. The 1340-21 eliminates these issues with a fresh, balanced tube and factory-accurate dimensions.

Part Data

SpecificationValue
SKU1340-21
Splines20 X 1.310"
Spline Length1.880"
Butt Diameter2.435"
Tube O.D.2.560"
Tube Wall Thickness0.065"
End to Weld6.375"

Center Support Bearing Interface

The center support bearing seats on the butt diameter (2.435") of the 1340-21. The bearing must be fully pressed to its seat and the bracket fasteners torqued correctly to hold the midship shaft in the proper driveline angle. An incorrectly shimmed or loose center support bearing transfers vibration into the cab and will damage the bearing itself in short order.

Replacement Steps

  • Remove the rear driveshaft section first to gain access to the midship shaft
  • Unbolt the center support bearing bracket from the crossmember
  • Mark the front yoke orientation before sliding off the output shaft
  • Press center support bearing onto 1340-21 butt diameter
  • Install in reverse order; shim center bearing for correct driveline angle
  • Road test to verify absence of vibration at all speeds

Get the Right Part Fast

Universal Driveshafts stocks the 1340-21 and matching center support bearings. Order both together for a complete midship assembly. Our driveline team can help you verify fitment using your vehicle's driveshaft data plate dimensions.

Stub & Midship Shaft relacionados

Ver la tabla completa

1340-21 preguntas

¿Cuántas estrías tiene 1340-21?

1340-21 está cortado para estrías 20 X 1.310 (cantidad × diámetro mayor). Cuenta las estrías del eje de salida y mide el diámetro mayor para confirmar.

¿Hay 1340-21 en existencia?

Sí. Hay 1 en existencia en Florida. La mayoría de los pedidos hechos antes de las 2 p. m. EST en día hábil salen el mismo día.

Esta traducción fue hecha con IA y puede contener errores. Si algo no queda claro, llame al (813) 524-6491 o cambie a inglés.