Part No. 3326-30A (also written 3326/30A) Weld Yokes, 1330 Series, Butt Dia 2.757", Tube Dia Wall 3.000X0.125
In stock1 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 3326-30A · 1330 Series Weld Yoke
- Part number
- 3326-30A
- Part type
- Weld Yoke
- Condition
- New
- Brand
- UDS
- Series
- 1330
- Material
- ALUMINUM
- Center u-joint to weld
- 2.500"
- Butt diameter
- 2.757
- Tube diameter wall
- 3.000X0.125
- Weight
- 1.12 lb
Fitment
1330 series parts use 1.062" u-joint bearing caps on a 3.625" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
Alternative parts for 3326-30A
Same fitment, another number or brand. Check the notes before you substitute.
| Add | Pic | Part # | Price | Series | Center U-J to Weld | Tube Dia & Wall | Material | Butt Dia | Brand |
|---|---|---|---|---|---|---|---|---|---|
 |
3326-306A |
$48.54
|
1330 | 2.500" | 3.000X0.125 | ALUMINUM | 2.757 | UDS |
Fits 3326-30A
Checked against the catalog measurements: these parts fit this one.
About 3326-30A
A 3.000" x 0.125" aluminum tube offers a strength-to-weight ratio well suited to front driveshaft applications on IFS/TTB trucks where minimizing rotating mass reduces front axle effort at high steering angles. The 3326-30A locates via its 2.757" butt diameter and is welded using 4043 filler at 250°F preheat. For vehicles with higher torque output -- supercharged or turbocharged builds above 600 ft-lb -- consider stepping up to the 1350-series weld yoke in the same tube diameter, as the 1330-series cap interface may be the limiting factor. Cross-reference: Neapco 2-0030A, Spicer Dana 3-26-577 for OEM application data.
Related Weld Yokes in the 1330 series
See the full table
3326-204
Weld Yokes, 1330 Series, Butt Dia 1.766", Tube Dia Wall 2.000X0.120
$22.97In stock
3326-271
Weld Yokes, 1330 Series, Butt Dia 2.625", Tube Dia Wall 2.750X0.065
$30.20In stock
3326-272
Weld Yokes, 1330 Series, Butt Dia 2.594", Tube Dia Wall 2.750X0.083
$29.42In stock
3326-306A
Weld Yokes, 1330 Series, Butt Dia 2.757", Tube Dia Wall 3.000X0.125
$48.54In stock
3326-356A
Weld Yokes, 1330 Series, Butt Dia 3.257", Tube Dia Wall 3.500X0.125
$48.50In stock
3326-35A
Weld Yokes, 1330 Series, Butt Dia 3.257", Tube Dia Wall 3.500X0.125
$80.25In stock
3326-40
Weld Tube Yoke 1330 Series, Fits: 4.000 x 0.083 Tube, Butt Dia: 3.844...
$37.82In stock
3326-405A
Weld Yokes, 1330 Series, Butt Dia 3.844", Tube Dia Wall 4.000X0.083
$46.31In stock
3326-30A questions
What series is 3326-30A?
3326-30A is a 1330 series weld yoke. Nominal 1330 dimensions are 1.062" bearing caps on a 3.625" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What tube size does 3326-30A fit?
3326-30A is machined for 3.000X0.125 driveshaft tube (outside diameter × wall thickness), with a 2.757" butt diameter. The tube must match both numbers for a correct weld fit.
Is 3326-30A in stock?
Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.