Part No. 3326-40 (also written 3326/40) Weld Tube Yoke 1330 Series, Fits: 4.000 x 0.083 Tube, Butt Dia: 3.844 CL To Weld: 1.750 Inch 2-28-1967 ( Longer 0.062 Than 2-28-1967 )
In stock9 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 3326-40 · 1330 Series Weld Yoke
- Part number
- 3326-40
- Part type
- Weld Yoke
- Condition
- New
- Brand
- UDS
- Series
- 1330
- Material
- STEEL
- Center u-joint to weld
- 1.750"
- Butt diameter
- 3.844
- Tube diameter wall
- 4.000X0.083
- Weight
- 2.93 lb
Fitment
1330 series parts use 1.062" u-joint bearing caps on a 3.625" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Interchange / cross-reference
- 2-28-1967
- N2-28-3637
3326-40 replaces or interchanges with 2-28-1967, N2-28-3637. Cross-reference numbers are supplied for identification; compare the series, spline and bolt-pattern dimensions above before substituting.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 3326-40
Series: 1330 | Cap Dia: 1.062" | Material: Steel | Tube: 4.000" x 0.083" | Butt Dia: 3.844" | C/U to Weld: 1.688"
The 3326-40 is the steel counterpart to the aluminum 3326-405A, sharing the same 4.000" tube diameter and 0.083" wall but offering approximately 2.5x the fatigue life under cyclic bending loads. Steel is the correct choice when the driveshaft operates at high working angles (above 6 degrees) or in heavy-duty towing applications where thermal cycling stresses the tube-to-yoke weld. The Spicer equivalent is referenced as part of the 3-28 series weld yoke family; Neapco catalogs a comparable part under the 2-0040 prefix. Verify butt diameter fit with a go/no-go gauge before final weld.
Related Weld Yokes in the 1330 series
See the full table
3326-204
Weld Yokes, 1330 Series, Butt Dia 1.766", Tube Dia Wall 2.000X0.120
$22.97In stock
3326-271
Weld Yokes, 1330 Series, Butt Dia 2.625", Tube Dia Wall 2.750X0.065
$30.20In stock
3326-272
Weld Yokes, 1330 Series, Butt Dia 2.594", Tube Dia Wall 2.750X0.083
$29.42In stock
3326-306A
Weld Yokes, 1330 Series, Butt Dia 2.757", Tube Dia Wall 3.000X0.125
$48.54In stock
3326-30A
Weld Yokes, 1330 Series, Butt Dia 2.757", Tube Dia Wall 3.000X0.125
$120.02In stock
3326-356A
Weld Yokes, 1330 Series, Butt Dia 3.257", Tube Dia Wall 3.500X0.125
$48.50In stock
3326-35A
Weld Yokes, 1330 Series, Butt Dia 3.257", Tube Dia Wall 3.500X0.125
$80.25In stock
3326-405A
Weld Yokes, 1330 Series, Butt Dia 3.844", Tube Dia Wall 4.000X0.083
$46.31In stock
3326-40 questions
What series is 3326-40?
3326-40 is a 1330 series weld yoke. Nominal 1330 dimensions are 1.062" bearing caps on a 3.625" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What tube size does 3326-40 fit?
3326-40 is machined for 4.000X0.083 driveshaft tube (outside diameter × wall thickness), with a 3.844" butt diameter. The tube must match both numbers for a correct weld fit.
What part numbers does 3326-40 replace?
3326-40 cross-references to 2-28-1967, N2-28-3637. Interchange data is for reference; compare the dimensions before substituting.
Is 3326-40 in stock?
Yes. 9 are in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.