3104-29 1310 Series End Yoke

零件号 3104-29 (也写作 3104/29) 端叉 1310系列 Dana 60 和 70 差速器 2-4-3801-1X

$79.14

现货50+ 件准备发货

大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。

  • 配件订单满 $ 免运费1,000
  • 14天退货
  • 适配咨询: (813) 524-6491

规格 3104-29 · 1310 Series End Yoke

测量方法将鼠标指向字母即可查看其尺寸
ABCFGE
零件编号
3104-29
零件类型
端叉
状态
全新
系列
1310
样式
BS
轮毂直径
1.875
花键数
29
花键直径
1.276
通孔
1.500"
万向节到端部
2.938
重量
2.05 lb

适配性

STRAP PART NUMBER : 2-70-18, DANA 60 , 70

1310 系列零件使用 1.062" 万向节轴承盖,卡簧到卡簧宽度为 3.219" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。

互换 / 交叉参考

  • 2-4-3801-1X

3104-29 可替换或互换自 2-4-3801-1X. 交叉参考编号仅供识别;购买替代件前,请先比对上方的系列、花键和螺栓孔距尺寸。

按您的邮编估算运费

计算运费

从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。

佛罗里达州本地自提 — 免费

购买此商品的顾客还购买了

其他客户与 3104-29 一起订购的零件。

T2-3-4911HPU 1310系列 - UDS Brand $193.44现货

关于 3104-29

The 1310 Series driveshaft standard has been the backbone of medium-duty automotive and light truck driveline engineering for decades. The 3104-29 end yoke from UDS is manufactured to the same dimensional standards that define this series, ensuring backward and forward compatibility across the wide range of vehicles and equipment that run 1310 Series drivetrain components.

The 1310 Series Standard Explained

Each driveshaft series -- 1100, 1310, 1350, and so on -- is defined by a specific set of U-joint cap dimensions, yoke ear geometry, and torque ratings. The 1310 Series designation tells you the cap diameter, width, and load envelope this yoke is designed for. Mixing series without proper adapter joints creates mismatched geometries that fail under load. The 3104-29 keeps everything within the 1310 Series specification.

  • Spline diameter: 1.276" -- the 1310 Series output shaft standard
  • Spline count: 29
  • Snap ring style: BS -- standard for 1310 Series service
  • Hub diameter: 1.875" -- mates with 1310 Series-rated differential or transfer case outputs
Specification Value
Series 1310 Series
Spline Diameter 1.276"
Spline Count 29
Hub Diameter 1.875"
Center U-Joint to End 2.938"
Through Hole Diameter 1.500"
Snap Ring Style BS
Application Note DANA 60 , 70
Brand UDS

Part Specifications

Dimensional adherence to the 1310 Series standard means this yoke will mate with any properly dimensioned 1310 Series U-joint and driveshaft. Application: DANA 60 , 70. The following table lists every critical dimension.

Ordering and Fitment Verification

Ordering the correct end yoke requires matching three numbers: the spline diameter (1.276"), the spline count (29), and the snap ring style (BS). If your shaft differs from these values, this part will not fit -- consult our fitment guide or contact our technical team before ordering.

The through hole diameter of 1.500" is relevant for applications with internal shafts or speedometer cable routing through the output yoke. The center-U-joint-to-end dimension of 2.938" must be matched to your driveshaft slip yoke or tube assembly for correct operating length.

Part 3104-29 is a UDS product. Universal Driveshafts stocks a complete range of 1310 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.

New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.

1310 系列中相关的 端叉

查看完整表格

3104-29 问题

3104-29 属于哪个系列?

3104-29 是 1310 系列 端叉。1310 系列标称尺寸为 1.062" 轴承盖,卡簧到卡簧宽度为 3.219". 订购前请测量旧万向节的轴承盖直径以确认系列。

3104-29 有多少个花键齿?

3104-29 在 1.276" 花键直径上有 29 个花键。 请清点输出轴上的花键并测量大径以确认。

3104-29 可替代哪些零件号?

3104-29 交叉对应于 2-4-3801-1X. 互换数据仅供参考;替代前请比对尺寸。

3104-29 有现货吗?

是的。佛罗里达仓库有 50+ 件现货。工作日美东标准时间(EST)下午2点前下的订单大多当天发货。

本翻译由 AI 生成,可能包含错误。如有不明之处,请致电 (813) 524-6491 或切换至英语。