3104-29 1310 Series End Yoke

部品番号 3104-29 (別表記 3104/29) エンドヨーク 1310シリーズ Dana 60 および 70 ディファレンシャル 2-4-3801-1X

$79.14

在庫あり50+ 件の出荷準備完了

在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。

  • 部品注文の送料無料金額 $1,000
  • 14日以内返品可能
  • 適合に関するサポート: (813) 524-6491

仕様 3104-29 · 1310 Series End Yoke

計測方法文字にカーソルを合わせると、その寸法が表示されます
ABCFGE
部品番号
3104-29
パーツタイプ
エンドヨーク
状態
新品
シリーズ
1310
スタイル
BS
ハブ径
1.875
スプライン数
29
スプライン径
1.276
通し穴
1.500"
ユニバーサルジョイントから端部まで
2.938
重量
2.05 lb

適合性

STRAP PART NUMBER : 2-70-18, DANA 60 , 70

1310 シリーズのパーツには 1.062" ユニバーサルジョイントのベアリングキャップを使用します スナップリング間幅 3.219" (公称)。ご注文前に、相手側のヨークまたはジョイントのキャップ径をご確認ください。

互換品 / クロスレファレンス

  • 2-4-3801-1X

3104-29 は 2-4-3801-1X と互換性があります。相互参照番号は識別用です。交換前に、上記のシリーズ、スプライン、ボルトパターンの寸法をご確認ください。

郵便番号への送料を見積もる

送料を計算

フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。

フロリダでの店頭受取 — 無料

こちらの商品も買われています

3104-29 と一緒に他の顧客が注文したパーツ。

3104-29 について

The 1310 Series driveshaft standard has been the backbone of medium-duty automotive and light truck driveline engineering for decades. The 3104-29 end yoke from UDS is manufactured to the same dimensional standards that define this series, ensuring backward and forward compatibility across the wide range of vehicles and equipment that run 1310 Series drivetrain components.

The 1310 Series Standard Explained

Each driveshaft series -- 1100, 1310, 1350, and so on -- is defined by a specific set of U-joint cap dimensions, yoke ear geometry, and torque ratings. The 1310 Series designation tells you the cap diameter, width, and load envelope this yoke is designed for. Mixing series without proper adapter joints creates mismatched geometries that fail under load. The 3104-29 keeps everything within the 1310 Series specification.

  • Spline diameter: 1.276" -- the 1310 Series output shaft standard
  • Spline count: 29
  • Snap ring style: BS -- standard for 1310 Series service
  • Hub diameter: 1.875" -- mates with 1310 Series-rated differential or transfer case outputs
Specification Value
Series 1310 Series
Spline Diameter 1.276"
Spline Count 29
Hub Diameter 1.875"
Center U-Joint to End 2.938"
Through Hole Diameter 1.500"
Snap Ring Style BS
Application Note DANA 60 , 70
Brand UDS

Part Specifications

Dimensional adherence to the 1310 Series standard means this yoke will mate with any properly dimensioned 1310 Series U-joint and driveshaft. Application: DANA 60 , 70. The following table lists every critical dimension.

Ordering and Fitment Verification

Ordering the correct end yoke requires matching three numbers: the spline diameter (1.276"), the spline count (29), and the snap ring style (BS). If your shaft differs from these values, this part will not fit -- consult our fitment guide or contact our technical team before ordering.

The through hole diameter of 1.500" is relevant for applications with internal shafts or speedometer cable routing through the output yoke. The center-U-joint-to-end dimension of 2.938" must be matched to your driveshaft slip yoke or tube assembly for correct operating length.

Part 3104-29 is a UDS product. Universal Driveshafts stocks a complete range of 1310 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.

New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.

1310 シリーズの関連する エンドヨーク

全一覧表を見る

3104-29 ご質問

3104-29 はどのシリーズですか?

3104-29 は 1310 シリーズの エンドヨーク です。 1310 シリーズの公称寸法は 1.062" ベアリングキャップです スナップリング間幅 3.219"。ご注文前に、古いジョイントのキャップ径を測ってシリーズをご確認ください。

3104-29 のスプライン数はいくつですか?

3104-29 はスプライン径 1.276" に 29 スプラインを備えています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。

3104-29 はどの部品番号の代替品ですか?

3104-29 は 2-4-3801-1X とクロスリファレンス対応しています。互換データは参考情報です。交換前に寸法をご確認ください。

3104-29 の在庫はありますか?

はい。フロリダ州に 50+ 点の在庫がございます。平日の東部標準時(EST)午後2時までのご注文の多くは、当日中に発送いたします。

この翻訳はAIによって作成されたものであり、エラーが含まれている可能性があります。ご不明な点がございましたら、(813) 524-6491にお電話いただくか、英語に切り替えてください。