3104-09 1310 Series End Yoke

零件号 3104-09 (也写作 3104/09) 端叉, 花键直径 1.328", 轮毂直径 1.739", 30 花键

$91.18

现货

大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。

  • 配件订单满 $ 免运费1,000
  • 14天退货
  • 适配咨询: (813) 524-6491

规格 3104-09 · 1310 Series End Yoke

测量方法将鼠标指向字母即可查看其尺寸
ABCFGED
零件编号
3104-09
零件类型
端叉
状态
全新
系列
1310
样式
BS
花键数
30
轮毂直径
1.739
花键直径
1.328
万向节到端部
2.850"
通孔
1.170"
孔类型
splined
重量
2.46 lb

适配性

GM 8.875, STRAP PART NUMBER:1-0024

1310 系列零件使用 1.062" 万向节轴承盖,卡簧到卡簧宽度为 3.219" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。

按您的邮编估算运费

计算运费

从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。

佛罗里达州本地自提 — 免费

关于 3104-09

The 1310 Series driveshaft standard has been the backbone of medium-duty automotive and light truck driveline engineering for decades. The 3104-09 end yoke from UDS is manufactured to the same dimensional standards that define this series, ensuring backward and forward compatibility across the wide range of vehicles and equipment that run 1310 Series drivetrain components.

The 1310 Series Standard Explained

Each driveshaft series -- 1100, 1310, 1350, and so on -- is defined by a specific set of U-joint cap dimensions, yoke ear geometry, and torque ratings. The 1310 Series designation tells you the cap diameter, width, and load envelope this yoke is designed for. Mixing series without proper adapter joints creates mismatched geometries that fail under load. The 3104-09 keeps everything within the 1310 Series specification.

  • Spline diameter: 1.328" -- the 1310 Series output shaft standard
  • Spline count: 30
  • Snap ring style: BS -- standard for 1310 Series service
  • Hub diameter: 1.739" -- mates with 1310 Series-rated differential or transfer case outputs
Specification Value
Series 1310 Series
Spline Diameter 1.328"
Spline Count 30
Hub Diameter 1.739"
Center U-Joint to End 2.850"
Through Hole Diameter 1.170"
Snap Ring Style BS
Application Note GM 8.875
Brand UDS

Part Specifications

Dimensional adherence to the 1310 Series standard means this yoke will mate with any properly dimensioned 1310 Series U-joint and driveshaft. Application: GM 8.875. The following table lists every critical dimension.

Ordering and Fitment Verification

Ordering the correct end yoke requires matching three numbers: the spline diameter (1.328"), the spline count (30), and the snap ring style (BS). If your shaft differs from these values, this part will not fit -- consult our fitment guide or contact our technical team before ordering.

The through hole diameter of 1.170" is relevant for applications with internal shafts or speedometer cable routing through the output yoke. The center-U-joint-to-end dimension of 2.850" must be matched to your driveshaft slip yoke or tube assembly for correct operating length.

Part 3104-09 is a UDS product. Universal Driveshafts stocks a complete range of 1310 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.

New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.

1310 系列中相关的 端叉

查看完整表格

3104-09 问题

3104-09 属于哪个系列?

3104-09 是 1310 系列 端叉。1310 系列标称尺寸为 1.062" 轴承盖,卡簧到卡簧宽度为 3.219". 订购前请测量旧万向节的轴承盖直径以确认系列。

3104-09 有多少个花键齿?

3104-09 在 1.328" 花键直径上有 30 个花键。 请清点输出轴上的花键并测量大径以确认。

本翻译由 AI 生成,可能包含错误。如有不明之处,请致电 (813) 524-6491 或切换至英语。