部品番号 3104-09 (別表記 3104/09) エンドヨーク, スプライン径 1.328", ハブ径 1.739", 30 スプライン
在庫あり
在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。
- 部品注文の送料無料金額 $1,000
- 14日以内返品可能
- 適合に関するサポート: (813) 524-6491
仕様 3104-09 · 1310 Series End Yoke
- 部品番号
- 3104-09
- パーツタイプ
- エンドヨーク
- 状態
- 新品
- シリーズ
- 1310
- スタイル
- BS
- スプライン数
- 30
- ハブ径
- 1.739
- スプライン径
- 1.328
- ユニバーサルジョイントから端部まで
- 2.850"
- 通し穴
- 1.170"
- ボアタイプ
- splined
- 重量
- 2.46 lb
適合性
GM 8.875, STRAP PART NUMBER:1-0024
1310 シリーズのパーツには 1.062" ユニバーサルジョイントのベアリングキャップを使用します スナップリング間幅 3.219" (公称)。ご注文前に、相手側のヨークまたはジョイントのキャップ径をご確認ください。
郵便番号への送料を見積もる
送料を計算
フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。
フロリダでの店頭受取 — 無料
3104-09 について
The 1310 Series driveshaft standard has been the backbone of medium-duty automotive and light truck driveline engineering for decades. The 3104-09 end yoke from UDS is manufactured to the same dimensional standards that define this series, ensuring backward and forward compatibility across the wide range of vehicles and equipment that run 1310 Series drivetrain components.
The 1310 Series Standard Explained
Each driveshaft series -- 1100, 1310, 1350, and so on -- is defined by a specific set of U-joint cap dimensions, yoke ear geometry, and torque ratings. The 1310 Series designation tells you the cap diameter, width, and load envelope this yoke is designed for. Mixing series without proper adapter joints creates mismatched geometries that fail under load. The 3104-09 keeps everything within the 1310 Series specification.
- Spline diameter: 1.328" -- the 1310 Series output shaft standard
- Spline count: 30
- Snap ring style: BS -- standard for 1310 Series service
- Hub diameter: 1.739" -- mates with 1310 Series-rated differential or transfer case outputs
| Specification | Value |
|---|---|
| Series | 1310 Series |
| Spline Diameter | 1.328" |
| Spline Count | 30 |
| Hub Diameter | 1.739" |
| Center U-Joint to End | 2.850" |
| Through Hole Diameter | 1.170" |
| Snap Ring Style | BS |
| Application Note | GM 8.875 |
| Brand | UDS |
Part Specifications
Dimensional adherence to the 1310 Series standard means this yoke will mate with any properly dimensioned 1310 Series U-joint and driveshaft. Application: GM 8.875. The following table lists every critical dimension.
Ordering and Fitment Verification
Ordering the correct end yoke requires matching three numbers: the spline diameter (1.328"), the spline count (30), and the snap ring style (BS). If your shaft differs from these values, this part will not fit -- consult our fitment guide or contact our technical team before ordering.
The through hole diameter of 1.170" is relevant for applications with internal shafts or speedometer cable routing through the output yoke. The center-U-joint-to-end dimension of 2.850" must be matched to your driveshaft slip yoke or tube assembly for correct operating length.
Part 3104-09 is a UDS product. Universal Driveshafts stocks a complete range of 1310 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.
New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.
1310 シリーズの関連する エンドヨーク
全一覧表を見る
3104-26CV
エンドヨーク, 1310シリーズ, 26 スプライン, スタイル CV
$48.27在庫あり
3104-05
エンドヨーク, スプライン径 1.188", 1310シリーズ, ハブ径 1.521"
$84.60在庫あり
3104-231
エンドヨーク, スプライン径 1.26", ハブ径 1.562", 23 スプライン
$104.94在庫あり
3104-02
エンドヨーク, スプライン径 1.146", ハブ径 1.844", 26 スプライン
$99.17在庫あり
2-4-0523
エンドヨーク, 1310シリーズ, ハブ径 2.125", 2.562" ジョイント・エンド間
$43.88在庫あり
2-4-1233
エンドヨーク - 丸穴 1310シリーズ, 1.500 内径キー溝: 0.375, ハブ Diamet...
$18.91在庫あり
N2-4-JK06
エンドヨーク, スプライン径 1.25", ハブ径 1.85", 24 スプライン
$115.63在庫あり
3104-321CV
エンドヨーク CV Conversion To 1310 Jeep JK NP241 07-18, counterbore by...
$42.66在庫あり
3104-09 ご質問
3104-09 はどのシリーズですか?
3104-09 は 1310 シリーズの エンドヨーク です。 1310 シリーズの公称寸法は 1.062" ベアリングキャップです スナップリング間幅 3.219"。ご注文前に、古いジョイントのキャップ径を測ってシリーズをご確認ください。
3104-09 のスプライン数はいくつですか?
3104-09 はスプライン径 1.328" に 30 スプラインを備えています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。