Part No. 6-4-7181X 6-4-7181-1X, End Yoke, 46 x 2.390" Splines, 5.391" Cj To End, 3.250" Hub Dia, Partn Number
In stock1 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 6-4-7181X · 1710 Series End Yoke
- Part number
- 6-4-7181X
- Part type
- End Yoke
- Condition
- New
- Series
- 1710
- Style
- BP
- Splines count
- 46
- Splines diameter
- 2.390"
- Hub diameter
- 3.250"
- Bore type
- splined
- CJ to end
- 5.391
- Through hole
- 2.328
- Weight
- 13.75 lb
Fitment
1710 series parts use 1.938" u-joint bearing caps (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Interchange / cross-reference
- N6-4-7181X
6-4-7181X replaces or interchanges with N6-4-7181X. Cross-reference numbers are supplied for identification; compare the series, spline and bolt-pattern dimensions above before substituting.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 6-4-7181X
The 6-4-7181X is a ball-and-pin (BP) style end yoke built for the 1710 series. Unlike snap-ring retention patterns, BP yokes use a ball-and-groove locking mechanism at the U-joint bearing cap interface common on certain North American heavy truck rear axles.
At 46 splines on a 2.390" pitch diameter, this is a large-bore shaft interface. The 46-spline count is used on tandem-drive axles and some heavy highway tractor configurations where pinion shaft size is larger than typical single-reduction axles. Compare this to the more common 35 or 39-spline 1710 applications.
| Spec | Value |
|---|---|
| Part Number | 6-4-7181X |
| Series | 1710 |
| Style | BP (Ball and Pin) |
| Spline Count | 46 |
| Spline Diameter | 2.390" |
| Hub Diameter | 3.250" |
| CJ-to-End | 5.391" |
| Through Hole | 2.328" |
The 3.250" hub diameter is larger than the standard 1710 yoke hub, indicating a heavier pinion shaft journal. Always verify the through-hole clearance against your pinion shaft thread or nut engagement length. Cross-reference: Spicer 6-4-7181-1X.
View all end yokes.
New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.
Related End Yokes in the 1710 series
See the full table
6-4-1981
End Yoke, 1710 Series, 1.960" Splines Dia, 2.812" Hub Dia
$116.17In stock
6-4-7481-1
End Yoke, 2.390" Splines Dia, 2.875" Hub Dia, 46 Spline
$108.34In stock
6-4-7141-1
End Yoke, 1710 Series, 1.998" Splines Dia, 2.810" Hub Dia
$129.32In stock
6-4-4601
End Yoke, 1710 Series, 2.350" Splines Dia, 3.312" Hub Dia
$127.51In stock
6-4-4601-1
End Yoke, 1710 Series, 2.35" Splines dia, 3.312" Hub Dia
$147.92In stock
6-4-7631-1X
End Yoke 1710HR Differential Yoke
$185.14In stock
3104-26CV
End Yoke, 1310 Series, 26 Splines, Style CV
$48.27In stock
3104-05
End Yoke, 1.188" Splines Dia, 1310 Series, 1.521" Hub Dia
$84.60In stock
6-4-7181X questions
What series is 6-4-7181X?
6-4-7181X is a 1710 series end yoke. Nominal 1710 dimensions are 1.938" bearing caps. Measure the cap diameter on your old joint to confirm the series before ordering.
What spline count does 6-4-7181X have?
6-4-7181X has 46 splines on a 2.390" spline diameter. Count the splines on the output shaft and measure across the major diameter to confirm.
What part numbers does 6-4-7181X replace?
6-4-7181X cross-references to N6-4-7181X. Interchange data is for reference; compare the dimensions before substituting.
Is 6-4-7181X in stock?
Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.