6-4-7181X 1710 Series End Yoke

Part No. 6-4-7181X 6-4-7181-1X, End Yoke, 46 x 2.390" Splines, 5.391" Cj To End, 3.250" Hub Dia, Partn Number

$376.40

In stock1 ready to ship

Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.

  • Free shipping on parts orders over $1,000
  • 14-day returns
  • Fitment help: (813) 524-6491

Specifications 6-4-7181X · 1710 Series End Yoke

How to measurePoint at a letter to read its measurement
ABCFGED
Part number
6-4-7181X
Part type
End Yoke
Condition
New
Series
1710
Style
BP
Splines count
46
Splines diameter
2.390"
Hub diameter
3.250"
Bore type
splined
CJ to end
5.391
Through hole
2.328
Weight
13.75 lb

Fitment

1710 series parts use 1.938" u-joint bearing caps (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.

Interchange / cross-reference

  • N6-4-7181X

6-4-7181X replaces or interchanges with N6-4-7181X. Cross-reference numbers are supplied for identification; compare the series, spline and bolt-pattern dimensions above before substituting.

Estimate shipping to your ZIP

Estimate shipping

Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.

Local pickup in Florida — free

About 6-4-7181X

The 6-4-7181X is a ball-and-pin (BP) style end yoke built for the 1710 series. Unlike snap-ring retention patterns, BP yokes use a ball-and-groove locking mechanism at the U-joint bearing cap interface common on certain North American heavy truck rear axles.

At 46 splines on a 2.390" pitch diameter, this is a large-bore shaft interface. The 46-spline count is used on tandem-drive axles and some heavy highway tractor configurations where pinion shaft size is larger than typical single-reduction axles. Compare this to the more common 35 or 39-spline 1710 applications.

Spec Value
Part Number 6-4-7181X
Series 1710
Style BP (Ball and Pin)
Spline Count 46
Spline Diameter 2.390"
Hub Diameter 3.250"
CJ-to-End 5.391"
Through Hole 2.328"

The 3.250" hub diameter is larger than the standard 1710 yoke hub, indicating a heavier pinion shaft journal. Always verify the through-hole clearance against your pinion shaft thread or nut engagement length. Cross-reference: Spicer 6-4-7181-1X.

View all end yokes.

New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.

Related End Yokes in the 1710 series

See the full table

6-4-7181X questions

What series is 6-4-7181X?

6-4-7181X is a 1710 series end yoke. Nominal 1710 dimensions are 1.938" bearing caps. Measure the cap diameter on your old joint to confirm the series before ordering.

What spline count does 6-4-7181X have?

6-4-7181X has 46 splines on a 2.390" spline diameter. Count the splines on the output shaft and measure across the major diameter to confirm.

What part numbers does 6-4-7181X replace?

6-4-7181X cross-references to N6-4-7181X. Interchange data is for reference; compare the dimensions before substituting.

Is 6-4-7181X in stock?

Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.