部品番号 3504-60 (別表記 3504/60) エンドヨーク, スプライン径 1.276", ハブ径 1.875"
在庫あり1 件の出荷準備完了
在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。
- 部品注文の送料無料金額 $1,000
- 14日以内返品可能
- 適合に関するサポート: (813) 524-6491
仕様 3504-60 · 1350 Series End Yoke
- 部品番号
- 3504-60
- パーツタイプ
- エンドヨーク
- 状態
- 新品
- シリーズ
- 1350
- スタイル
- UB
- ハブ径
- 1.875
- スプライン数
- 29
- スプライン径
- 1.276
- 通し穴
- 1.500"
- ユニバーサルジョイントから端部まで
- 3.375"
- ボアタイプ
- splined
- 重量
- 2.51 lb
適合性
U BOLT PART NUMBER: 3-94-18, DANA 60
1350 シリーズのパーツには 1.188" ユニバーサルジョイントのベアリングキャップを使用します スナップリング間幅 3.625" (公称)。ご注文前に、相手側のヨークまたはジョイントのキャップ径をご確認ください。
郵便番号への送料を見積もる
送料を計算
フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。
フロリダでの店頭受取 — 無料
3504-60 について
The 1350 Series driveshaft standard has been the backbone of medium-duty automotive and light truck driveline engineering for decades. The 3504-60 end yoke from UDS is manufactured to the same dimensional standards that define this series, ensuring backward and forward compatibility across the wide range of vehicles and equipment that run 1350 Series drivetrain components.
The 1350 Series Standard Explained
Each driveshaft series -- 1100, 1310, 1350, and so on -- is defined by a specific set of U-joint cap dimensions, yoke ear geometry, and torque ratings. The 1350 Series designation tells you the cap diameter, width, and load envelope this yoke is designed for. Mixing series without proper adapter joints creates mismatched geometries that fail under load. The 3504-60 keeps everything within the 1350 Series specification.
- Spline diameter: 1.276" -- the 1350 Series output shaft standard
- Spline count: 29
- Snap ring style: UB -- standard for 1350 Series service
- Hub diameter: 1.875" -- mates with 1350 Series-rated differential or transfer case outputs
| Specification | Value |
|---|---|
| Series | 1350 Series |
| Spline Diameter | 1.276" |
| Spline Count | 29 |
| Hub Diameter | 1.875" |
| Center U-Joint to End | 3.375" |
| Through Hole Diameter | 1.500" |
| Snap Ring Style | UB |
| Application Note | DANA 60 |
| Brand | UDS |
Part Specifications
Dimensional adherence to the 1350 Series standard means this yoke will mate with any properly dimensioned 1350 Series U-joint and driveshaft. Application: DANA 60. The following table lists every critical dimension.
Ordering and Fitment Verification
Ordering the correct end yoke requires matching three numbers: the spline diameter (1.276"), the spline count (29), and the snap ring style (UB). If your shaft differs from these values, this part will not fit -- consult our fitment guide or contact our technical team before ordering.
The through hole diameter of 1.500" is relevant for applications with internal shafts or speedometer cable routing through the output yoke. The center-U-joint-to-end dimension of 3.375" must be matched to your driveshaft slip yoke or tube assembly for correct operating length.
Part 3504-60 is a UDS product. Universal Driveshafts stocks a complete range of 1350 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.
New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.
1350 シリーズの関連する エンドヨーク
全一覧表を見る
3504-04
エンドヨーク, スプライン径 1.312", ハブ径 2.110", 30 スプライン
$114.87在庫あり
3504-09
エンドヨーク, 1350シリーズ, スプライン径 1.343", ハブ径 1.812"
$121.02在庫あり
N3-4-JK08
エンドヨーク, 1350シリーズ, スプライン径 1.250", ハブ径 1.85"
$111.55在庫あり
3504-03
エンドヨーク, 1350シリーズ, スプライン径 1.343", ハブ径 1.812"
$102.26在庫あり
3504-101
エンドヨーク, 1350シリーズ, スプライン径 1.375", ハブ径 1.750"
$118.59在庫あり
3504-85
エンドヨーク, 1350シリーズ, スプライン径 1.312", ハブ径 1.94"
$108.75在庫あり
3504-10
エンドヨーク, 1350シリーズ, スプライン径 1.188", ハブ径 1.875""
$121.07在庫あり
3504-243
エンドヨーク, 1350シリーズ, スプライン径 1.250", ハブ径 1.876"
$107.73在庫あり
3504-60 ご質問
3504-60 はどのシリーズですか?
3504-60 は 1350 シリーズの エンドヨーク です。 1350 シリーズの公称寸法は 1.188" ベアリングキャップです スナップリング間幅 3.625"。ご注文前に、古いジョイントのキャップ径を測ってシリーズをご確認ください。
3504-60 のスプライン数はいくつですか?
3504-60 はスプライン径 1.276" に 29 スプラインを備えています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。
3504-60 の在庫はありますか?
はい。フロリダ州に 1 点の在庫がございます。平日の東部標準時(EST)午後2時までのご注文の多くは、当日中に発送いたします。