零件号 3504-03 (也写作 3504/03) 端叉, 1350系列, 花键直径 1.343", 轮毂直径 1.812"
现货
大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。
- 配件订单满 $ 免运费1,000
- 14天退货
- 适配咨询: (813) 524-6491
规格 3504-03 · 1350 Series End Yoke
- 零件编号
- 3504-03
- 零件类型
- 端叉
- 状态
- 全新
- 系列
- 1350
- 样式
- BS
- 轮毂直径
- 1.812
- 花键数
- 31
- 花键直径
- 1.343
- 通孔
- 1.262
- 孔类型
- splined
- 万向节到端部
- 3.143
- 重量
- 2.62 lb
适配性
FORD 10.25, E250: 1985 - 1998, F150: 2000 - 2006, F250: 1985 - 1998, F350: 1985 - 1998
1350 系列零件使用 1.188" 万向节轴承盖,卡簧到卡簧宽度为 3.625" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。
按您的邮编估算运费
计算运费
从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。
佛罗里达州本地自提 — 免费
关于 3504-03
Not all end yokes are created equal -- the material and machining process determine whether a yoke lasts 200,000 miles or fails in 20,000. The 3504-03 is a UDS 1350 Series end yoke manufactured from high-grade steel with machined spline bores, precision bearing seats, and controlled snap ring grooves. It is the correct choice for any drivetrain that demands durability over the long haul.
Material and Construction
The raw material for this yoke is selected for its combination of tensile strength and machinability. After rough forming, the spline bore, hub, and bearing seats are finish-machined on CNC equipment to hold tolerances that exceed OEM specifications. The BS snap ring groove is cut to a consistent depth and width, ensuring that the snap ring seats fully and cannot back out under vibration.
- High-grade steel construction -- resists deformation under high-torque loads
- CNC-machined bearing bores -- consistent, round seats for U-joint caps
- Controlled spline form -- 1.343" diameter, 31-spline interface
- Protective coating -- resists corrosion during storage and service life
| Specification | Value |
|---|---|
| Series | 1350 Series |
| Spline Diameter | 1.343" |
| Spline Count | 31 |
| Hub Diameter | 1.812" |
| Center U-Joint to End | 3.143" |
| Through Hole Diameter | 1.262" |
| Snap Ring Style | BS |
| Application Note | E250: 1985 - 1998 |
| Brand | UDS |
Dimensional Reference
Every dimension on this yoke has a functional purpose. The 1.812" hub diameter determines how the yoke registers against the output shaft seal or retainer. The 3.143" center-to-end measurement affects driveshaft operating length. The 1.262" through hole prevents interference with internal shafts or speedometer cables. None of these dimensions can be ignored when selecting a replacement.
Application and Installation
This yoke is designed for E250: 1985 - 1998. Installation requires a clean output shaft free of nicks, corrosion, or damaged splines. Inspect the snap ring groove in the shaft before installing the new yoke. Torque the retaining hardware to specification -- do not rely on thread friction alone to retain the yoke under high-RPM operation.
Pair with a fresh 1350 Series U-joint for a complete driveline service. Reusing an old U-joint with a new yoke negates the benefits of the replacement.
Part 3504-03 is a UDS product. Universal Driveshafts stocks a complete range of 1350 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.
New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.
1350 系列中相关的 端叉
查看完整表格
3504-04
端叉, 花键直径 1.312", 轮毂直径 2.110", 30 花键
$114.87现货
3504-09
端叉, 1350系列, 花键直径 1.343", 轮毂直径 1.812"
$121.02现货
N3-4-JK08
端叉, 1350系列, 花键直径 1.250", 轮毂直径 1.85"
$111.55现货
3504-101
端叉, 1350系列, 花键直径 1.375", 轮毂直径 1.750"
$118.59现货
3504-85
端叉, 1350系列, 花键直径 1.312", 轮毂直径 1.94"
$108.75现货
3504-10
端叉, 1350系列, 花键直径 1.188", 轮毂直径 1.875""
$121.07现货
3504-243
端叉, 1350系列, 花键直径 1.250", 轮毂直径 1.876"
$107.73现货
3504-06
端叉, 1350系列, 花键直径 1.146", 轮毂直径 1.552"
$92.40现货
3504-03 问题
3504-03 属于哪个系列?
3504-03 是 1350 系列 端叉。1350 系列标称尺寸为 1.188" 轴承盖,卡簧到卡簧宽度为 3.625". 订购前请测量旧万向节的轴承盖直径以确认系列。
3504-03 有多少个花键齿?
3504-03 在 1.343" 花键直径上有 31 个花键。 请清点输出轴上的花键并测量大径以确认。