3503-324 1350 Series End Yoke

部品番号 3503-324 (別表記 3503/324) エンドヨーク, スプライン径 1.378", ハブ径 1.885"

$101.17

在庫あり1 件の出荷準備完了

在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。

  • 部品注文の送料無料金額 $1,000
  • 14日以内返品可能
  • 適合に関するサポート: (813) 524-6491

仕様 3503-324 · 1350 Series End Yoke

計測方法文字にカーソルを合わせると、その寸法が表示されます
ABCFGED
部品番号
3503-324
パーツタイプ
エンドヨーク
状態
新品
シリーズ
1350
スタイル
BS
ユニバーサルジョイントから端部まで
5.594
ハブ径
1.885
スプライン数
31/32
スプライン径
1.378
通し穴
4.094
ボアタイプ
splined
重量
3.96 lb

適合性

REPLACES 3-4-13211-1 -

1350 シリーズのパーツには 1.188" ユニバーサルジョイントのベアリングキャップを使用します スナップリング間幅 3.625" (公称)。ご注文前に、相手側のヨークまたはジョイントのキャップ径をご確認ください。

郵便番号への送料を見積もる

送料を計算

フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。

フロリダでの店頭受取 — 無料

3503-324 について

Every driveshaft system is only as strong as its weakest yoke. The 3503-324 is a UDS 1350 Series end yoke built to handle the torsional demands of performance applications -- from high-horsepower street builds to off-road rigs that flex the suspension to its limits. With a 1.378" spline interface and precision-machined bearing seats, this yoke transfers power cleanly without the slop that kills U-joints prematurely.

Performance-Grade Construction

The 1350 Series yoke series was developed to handle loads beyond light-duty OEM specifications. The 3503-324 carries the full load rating of the 1350 Series system, making it appropriate for high-torque applications including turbocharged and supercharged drivetrains, towing configurations, and competition use.

  • Full 1350 Series torque rating -- no derating for special applications
  • Precision bearing bores -- eliminate U-joint cap rocking that causes premature wear
  • Snap ring style: BS -- positive retention under shock loading
  • Hub diameter: 1.885" -- correct registration against diff or transfer case seal
Specification Value
Series 1350 Series
Spline Diameter 1.378"
Spline Count 31/32
Hub Diameter 1.885"
Center U-Joint to End 5.594"
Through Hole Diameter 4.094"
Snap Ring Style BS
Application Note REPLACES 3-4-13211-1 -
Brand UDS

Specifications

Performance fitment requires exact dimensional matching. The 3503-324 is built to the following specs -- particularly relevant for REPLACES 3-4-13211-1 -:

Pairing for Maximum Drivetrain Life

The weakest link in any driveshaft assembly determines its service life. Pairing a fresh 3503-324 end yoke with a new 1350 Series U-joint and a properly balanced driveshaft eliminates the three most common failure points. For high-horsepower builds, also inspect the driveshaft tube for straightness and the slip yoke for wear -- replacing a yoke without addressing these components leaves the system vulnerable to the same vibration-induced failure.

Center-to-end measurement of 5.594" must be accounted for when calculating driveshaft operating length after suspension lifts or drivetrain swaps.

Part 3503-324 is a UDS product. Universal Driveshafts stocks a complete range of 1350 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.

New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.

1350 シリーズの関連する エンドヨーク

全一覧表を見る

3503-324 ご質問

3503-324 はどのシリーズですか?

3503-324 は 1350 シリーズの エンドヨーク です。 1350 シリーズの公称寸法は 1.188" ベアリングキャップです スナップリング間幅 3.625"。ご注文前に、古いジョイントのキャップ径を測ってシリーズをご確認ください。

3503-324 のスプライン数はいくつですか?

3503-324 はスプライン径 1.378" に 31/32 スプラインを備えています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。

3503-324 の在庫はありますか?

はい。フロリダ州に 1 点の在庫がございます。平日の東部標準時(EST)午後2時までのご注文の多くは、当日中に発送いたします。

この翻訳はAIによって作成されたものであり、エラーが含まれている可能性があります。ご不明な点がございましたら、(813) 524-6491にお電話いただくか、英語に切り替えてください。