零件号 3-26-447U High Angle 焊接叉, 1410系列 - 适用于至传动轴管 2.285 x 0.160 - UDS
现货50+ 件准备发货
大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。
- 配件订单满 $ 免运费1,000
- 14天退货
- 适配咨询: (813) 524-6491
规格 3-26-447U · 1410 Series Weld Yoke
- 零件编号
- 3-26-447U
- 零件类型
- 焊接叉
- 状态
- 全新
- 品牌
- UDS
- 系列
- 1410
- 材料
- STEEL
- 万向节中心到焊接处
- 2.125
- 对接直径
- 2.133
- 管径和壁厚
- 2.285x0.160
- 重量
- 3 lb
适配性
high angle weld yoke 1410
1410 系列零件使用 1.188" 万向节轴承盖,卡簧到卡簧宽度为 4.188" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。
按您的邮编估算运费
计算运费
从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。
佛罗里达州本地自提 — 免费
关于 3-26-447U
Universal Driveshafts 3-26-447U -- Engineered for 1410 Series Performance
Weld tube yokes are the u-joint-end connection for custom driveshaft tubes. The 3-26-447U is a 1410 series weld yoke for 2.285x0.160-inch OD tube with listed-inch wall, with a butt diameter of 2.133 inch and a CJ-to-weld distance of 2.125 inch. It is engineered to the same geometry as original equipment, so the installation follows OEM procedures without special tooling or adaptation. Universal Driveshafts maintains this part in active inventory because it covers applications that older OEM part numbers no longer reach.
Complete Technical Data
| Specification | Value |
|---|---|
| Series | 1410 |
| Tube OD x Wall | 2.285x0.160 |
| Butt Dia | 2.133 |
| CJ to Weld | 2.125 |
| Material | STEEL |
| Brand | UDS |
| Part Number | 3-26-447U |
Material and Durability
The 3-26-447U is produced from steel, which provides the combination of yield strength and toughness required for 1410 series rated loads. High-strength components in the drivetrain operate at stress levels that are proportional to engine torque -- on a vehicle capable of generating significant torque (diesel trucks, performance builds, heavy towing applications), this means the yoke material is genuinely load-critical. UDS selects materials appropriate for those service conditions.
Ordering and Installation Notes
- Confirm tube OD 2.285x0.160 x wall listed, butt dia 2.133 before ordering -- this is the primary fitment dimension
- Cross-reference any existing part numbers stamped on the component being replaced
- Inspect output shaft or companion flange for damage before fitting the new weld tube yoke
- Use anti-seize on threads in corrosive environments (undercarriage, marine, off-road)
- Re-torque after initial break-in if this is a first-fit assembly
Note: high angle weld yoke 1410
The 3-26-447U is a stocked catalog item at Universal Driveshafts. Ships promptly with standard packaging for safe transit of precision machined surfaces.
1410 系列中相关的 焊接叉
查看完整表格
4126-405A
铝焊接叉 1410 4.000 X 0.083 端面直径: 3.850
$41.48现货
4126-406A
铝焊接叉 1410 4.000 X 0.125 端面直径: 3.757
$55.15现货
4126-41A
焊接叉, 1410系列, 端面直径 3.757", 管径×壁厚 4.000X0.125
$203.68现货
4126-501A
焊接叉, 1410系列, 端面直径 4.888", 管径×壁厚 5.000X0.065
$121.25现货
4126-506A
焊接叉, 1410系列, 端面直径 4.757", 管径×壁厚 5.000X0.125
$71.48现货
4126-50A
焊接叉, 1410系列, 端面直径 4.757", 管径×壁厚 5.000X0.125
$107.72现货
3-28-557
焊管叉 1410 适用于: 3.500 x 0.083 管, Butt: 3.344 Inch 中心线至焊接处:...
$15.78现货
3-28-97
焊管叉 1410 适用于 3.000 x 0.083 管, Butt: 2.844 Inch, 中心线至焊接处:...
$20.31现货
3-26-447U 问题
3-26-447U 属于哪个系列?
3-26-447U 是 1410 系列 焊接叉。1410 系列标称尺寸为 1.188" 轴承盖,卡簧到卡簧宽度为 4.188". 订购前请测量旧万向节的轴承盖直径以确认系列。
3-26-447U 适配什么管径的传动轴管?
3-26-447U 经机械加工适用于 2.285x0.160 传动轴管(外径 × 壁厚),带有 2.133" 的插口直径. 管材必须符合两个数字才能完美焊接配合。
3-26-447U 有现货吗?
是的。佛罗里达仓库有 50+ 件现货。工作日美东标准时间(EST)下午2点前下的订单大多当天发货。