Part No. 3-26-447U High Angle Weld Yoke, 1410 Series - Fits to Tube 2.285 x 0.160 - UDS
In stock50+ ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 3-26-447U · 1410 Series Weld Yoke
- Part number
- 3-26-447U
- Part type
- Weld Yoke
- Condition
- New
- Brand
- UDS
- Series
- 1410
- Material
- STEEL
- Center u-joint to weld
- 2.125
- Butt diameter
- 2.133
- Tube diameter wall
- 2.285x0.160
- Weight
- 3 lb
Fitment
high angle weld yoke 1410
1410 series parts use 1.188" u-joint bearing caps on a 4.188" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 3-26-447U
Universal Driveshafts 3-26-447U -- Engineered for 1410 Series Performance
Weld tube yokes are the u-joint-end connection for custom driveshaft tubes. The 3-26-447U is a 1410 series weld yoke for 2.285x0.160-inch OD tube with listed-inch wall, with a butt diameter of 2.133 inch and a CJ-to-weld distance of 2.125 inch. It is engineered to the same geometry as original equipment, so the installation follows OEM procedures without special tooling or adaptation. Universal Driveshafts maintains this part in active inventory because it covers applications that older OEM part numbers no longer reach.
Complete Technical Data
| Specification | Value |
|---|---|
| Series | 1410 |
| Tube OD x Wall | 2.285x0.160 |
| Butt Dia | 2.133 |
| CJ to Weld | 2.125 |
| Material | STEEL |
| Brand | UDS |
| Part Number | 3-26-447U |
Material and Durability
The 3-26-447U is produced from steel, which provides the combination of yield strength and toughness required for 1410 series rated loads. High-strength components in the drivetrain operate at stress levels that are proportional to engine torque -- on a vehicle capable of generating significant torque (diesel trucks, performance builds, heavy towing applications), this means the yoke material is genuinely load-critical. UDS selects materials appropriate for those service conditions.
Ordering and Installation Notes
- Confirm tube OD 2.285x0.160 x wall listed, butt dia 2.133 before ordering -- this is the primary fitment dimension
- Cross-reference any existing part numbers stamped on the component being replaced
- Inspect output shaft or companion flange for damage before fitting the new weld tube yoke
- Use anti-seize on threads in corrosive environments (undercarriage, marine, off-road)
- Re-torque after initial break-in if this is a first-fit assembly
Note: high angle weld yoke 1410
The 3-26-447U is a stocked catalog item at Universal Driveshafts. Ships promptly with standard packaging for safe transit of precision machined surfaces.
Related Weld Yokes in the 1410 series
See the full table
4126-405A
ALUMINUM WELD YOKE 1410 4.000 X 0.083 Butt Dia: 3.850
$41.48In stock
4126-406A
ALUMINUM WELD YOKE 1410 4.000 X 0.125 Butt Dia: 3.757
$55.15In stock
4126-41A
Weld Yokes, 1410 Series, Butt Dia 3.757", Tube Dia Wall 4.000X0.125
$203.68In stock
4126-501A
Weld Yokes, 1410 Series, Butt Dia 4.888", Tube Dia Wall 5.000X0.065
$121.25In stock
4126-506A
Weld Yokes, 1410 Series, Butt Dia 4.757", Tube Dia Wall 5.000X0.125
$71.48In stock
4126-50A
Weld Yokes, 1410 Series, Butt Dia 4.757", Tube Dia Wall 5.000X0.125
$107.72In stock
3-28-557
Weld Tube Yoke 1410 Fits: 3.500 x 0.083 Tube, Butt: 3.344 Inch Centerl...
$15.78In stock
3-28-97
Weld Tube Yoke 1410 Fits 3.000 x 0.083 Tube, Butt: 2.844 Inch, Centerl...
$20.31In stock
3-26-447U questions
What series is 3-26-447U?
3-26-447U is a 1410 series weld yoke. Nominal 1410 dimensions are 1.188" bearing caps on a 4.188" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What tube size does 3-26-447U fit?
3-26-447U is machined for 2.285x0.160 driveshaft tube (outside diameter × wall thickness), with a 2.133" butt diameter. The tube must match both numbers for a correct weld fit.
Is 3-26-447U in stock?
Yes. 50+ are in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.