零件号 2-3-8001KX 滑动叉, 1310系列, 花键直径 1.375", Center 万向节 To End 6.812

Built for Forged, the 2-3-8001KX slip yoke provides the axial compliance your driveline needs to accommodate suspension movement without vibration or binding. This 1310 series unit carries 16 splines at 1.375" diameter for a precise, rattle-free fit on the transmission output shaft.

Product Description

Slip yoke replacement is often overlooked during driveshaft service, yet a worn yoke is frequently the root cause of vibration complaints that return after U-joint replacement. The 2-3-8001KX restores the correct spline-to-bore clearance and presents an undamaged sliding surface to the extension housing seal, eliminating leak paths that develop with worn OEM yokes.

Part Details

Series Compatibility

The 1310 series U-joint cross bores must match the yoke ear dimensions of the 2-3-8001KX. Do not mix series -- a 1310 slip yoke should be paired only with a 1310 or compatible-series cross and companion yoke. Mismatched series results in incorrect snap ring grooves and potential joint separation under load.

Replacement Guidance

• Confirm 16-tooth count and 1.375" diameter match your transmission output shaft
• Measure center-to-end dimension if your application has tight length constraints
• Use assembly lube on splines during installation
• Reinstall transmission extension seal if it shows any sign of wear
• Phasing: reinstall driveshaft in the original orientation (mark before removal)

Why Universal Driveshafts

We specialize in driveline components across all series and vehicle types. The 2-3-8001KX is part of our standard inventory -- no waiting on special orders. Our team can cross-reference by vehicle year/make/model or by direct measurement to confirm the right part every time.

Not sure which slip yoke you need? Our transmission slip yoke guide covers spline counts, styles, and how to measure.