Part No. 2-3-15651X Slip Yoke, 1330 Series, 1.338" Splines Dia, Center U Joint To End 6.724
In stock10 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 2-3-15651X · 1330 Series Slip Yoke
- Part number
- 2-3-15651X
- Part type
- Slip Yoke
- Condition
- New
- Series
- 1330
- Center u-joint to end
- 6.724
- Splines count
- 18/20
- Splines diameter
- 1.338
- Weight
- 4.4 lb
Fitment
Toyota Tacoma - Spicer
1330 series parts use 1.062" u-joint bearing caps on a 3.625" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 2-3-15651X
Driveline clunk, vibration at a specific speed, and unexplained transmission fluid leaks share a common culprit: a worn slip yoke. The 2-3-15651X delivers a ready-to-install 1330 series replacement with 18/20 splines at 1.338" diameter, purpose-built to solve these symptoms and restore smooth, quiet driveshaft operation.
Diagnosing Slip Yoke Failure
A healthy slip yoke moves smoothly on the output shaft with minimal radial play and no perceptible spline backlash. When the splines wear, the yoke develops side-to-side movement that creates the characteristic low-frequency thud heard during tip-in acceleration. Simultaneously, the scored sliding surface begins to damage the transmission seal, eventually producing a fluid trail on the driveshaft. Replacing the 2-3-15651X at the first sign of spline wear prevents cascading damage to the seal and output shaft.
Part Specifications
| Specification | Detail |
|---|---|
| Part No. | 2-3-15651X |
| Series | 1330 |
| Spline Count | 18/20 |
| Spline Bore | 1.338" |
| U-Joint CL to End | 6.724" |
| Notes | Toyota Tacoma - Spicer |
Confirming the Right Part
The 18/20-spline, 1.338" bore is the critical match criterion for your transmission. Count the splines on your output shaft, then measure pitch diameter with a micrometer or vernier caliper across the pitch circle. If the numbers match 18/20 and 1.338", the 2-3-15651X is your correct replacement.
Replacement Procedure Summary
- Mark the rear driveshaft orientation at the differential companion flange
- Slide the driveshaft rearward to disengage the slip yoke from the transmission
- Replace the transmission extension housing seal while you have access
- Slide new 2-3-15651X onto output shaft -- feel for full spline engagement
- Reconnect rear of driveshaft in marked orientation
- Top off transmission fluid; road test and confirm no leaks
Stocked and Ready
Universal Driveshafts maintains on-shelf inventory of 1330 series slip yokes including the 2-3-15651X. Fast shipping available. Contact us for fleet pricing or bulk orders.
Not sure which slip yoke you need? Our transmission slip yoke guide covers spline counts, styles, and how to measure.
Related Slip Yoke in the 1330 series
See the full table
3303-162
Slip Yoke, 1.375" Splines Dia, 16 Splines, Center U Joint To End 7.500
$43.28In stock
2-3-7681KX
Slip Yoke 1330 Series, Splines: 1.375x15/16, Centerline To End: 6.625
$41.15In stock
2-3-7961KX
Slip Yoke 1330 series, Spline: 1.375x16, Center Line To End: 6 Inch
$26.41In stock
2-3-8041KX
Slip Yoke 1330 Series, Splines diameter: 1.375 Splines Count:16 spline...
$30.86In stock
10-3-18KX
Slip Yoke 1000 Series 1.250 X 16 splines 5.500 Centerline to End
$20.48In stock
1403-16
Slip Yoke, 1100 Series, 1.063" Splines Dia, Center U Joint To End 4.31...
$60.99In stock
3003-16
Slip Yoke 1300 Series, Splines diameter: 1.375, Splines Count: 16
$97.08In stock
2-3-15651X questions
What series is 2-3-15651X?
2-3-15651X is a 1330 series slip yoke. Nominal 1330 dimensions are 1.062" bearing caps on a 3.625" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What spline count does 2-3-15651X have?
2-3-15651X has 18/20 splines on a 1.338" spline diameter. Count the splines on the output shaft and measure across the major diameter to confirm.
Is 2-3-15651X in stock?
Yes. 10 are in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.