部品番号 S4-3-1751KX スリップヨーク, スプライン径 1.750", 1550シリーズ, Center ユニバーサルジョイント To End 5.375
在庫あり1 件の出荷準備完了
在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。
- 部品注文の送料無料金額 $1,000
- 14日以内返品可能
- 適合に関するサポート: (813) 524-6491
仕様 S4-3-1751KX · 1550 Series Slip Yoke
- 部品番号
- S4-3-1751KX
- パーツタイプ
- スリップヨーク
- 状態
- 新品
- シリーズ
- 1550
- スプライン数
- 16
- ユニバーサルジョイント中心から端部まで
- 5.375
- スプライン径
- 1.750"
- 重量
- 6 lb
適合性
Spicer
1550 シリーズのパーツには 1.375" ユニバーサルジョイントのベアリングキャップを使用します スナップリング間幅 4.875" (公称)。ご注文前に、相手側のヨークまたはジョイントのキャップ径をご確認ください。
郵便番号への送料を見積もる
送料を計算
フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。
フロリダでの店頭受取 — 無料
S4-3-1751KX について
Driveline clunk, vibration at a specific speed, and unexplained transmission fluid leaks share a common culprit: a worn slip yoke. The S4-3-1751KX delivers a ready-to-install 1550 series replacement with 16 splines at 1.750"" diameter, purpose-built to solve these symptoms and restore smooth, quiet driveshaft operation.
Diagnosing Slip Yoke Failure
A healthy slip yoke moves smoothly on the output shaft with minimal radial play and no perceptible spline backlash. When the splines wear, the yoke develops side-to-side movement that creates the characteristic low-frequency thud heard during tip-in acceleration. Simultaneously, the scored sliding surface begins to damage the transmission seal, eventually producing a fluid trail on the driveshaft. Replacing the S4-3-1751KX at the first sign of spline wear prevents cascading damage to the seal and output shaft.
Part Specifications
| Specification | Detail |
|---|---|
| Part No. | S4-3-1751KX |
| Series | 1550 |
| Spline Count | 16 |
| Spline Bore | 1.750"" |
| U-Joint CL to End | 5.375" |
| Notes | Spicer |
Confirming the Right Part
The 16-spline, 1.750"" bore is the critical match criterion for your transmission. Count the splines on your output shaft, then measure pitch diameter with a micrometer or vernier caliper across the pitch circle. If the numbers match 16 and 1.750"", the S4-3-1751KX is your correct replacement.
Replacement Procedure Summary
- Mark the rear driveshaft orientation at the differential companion flange
- Slide the driveshaft rearward to disengage the slip yoke from the transmission
- Replace the transmission extension housing seal while you have access
- Slide new S4-3-1751KX onto output shaft -- feel for full spline engagement
- Reconnect rear of driveshaft in marked orientation
- Top off transmission fluid; road test and confirm no leaks
Stocked and Ready
Universal Driveshafts maintains on-shelf inventory of 1550 series slip yokes including the S4-3-1751KX. Fast shipping available. Contact us for fleet pricing or bulk orders.
Not sure which slip yoke you need? Our transmission slip yoke guide covers spline counts, styles, and how to measure.
1550 シリーズの関連する スリップヨーク
全一覧表を見る
S4-3-1241KX
スリップヨーク, 1550シリーズ, スプライン径 1.750", Center ユニバーサル...
$213.09在庫あり
5503-241
スリップヨーク, スプライン径 1.562", 23/24 スプライン, Center ユニバー...
$91.36在庫あり
4-3-1241KX
スリップヨーク 1550シリーズ, スプライン: 1.750x16, 中心・エンド間: 6.8...
$41.57在庫あり
4-3-1431KX
スリップヨーク 1550シリーズ, スプライン: 1.750x16, 中心・エンド間: 10....
$90.94在庫あり
10-3-18KX
スリップヨーク 1000シリーズ 1.250 X 16 スプライン 5.500 中心・エンド間
$20.48在庫あり
1403-16
スリップヨーク, 1100シリーズ, スプライン径 1.063", Center ユニバーサル...
$60.99在庫あり
3003-16
スリップヨーク 1300シリーズ, スプライン径: 1.375, スプライン数: 16
$97.08在庫あり
S4-3-1751KX ご質問
S4-3-1751KX はどのシリーズですか?
S4-3-1751KX は 1550 シリーズの スリップヨーク です。 1550 シリーズの公称寸法は 1.375" ベアリングキャップです スナップリング間幅 4.875"。ご注文前に、古いジョイントのキャップ径を測ってシリーズをご確認ください。
S4-3-1751KX のスプライン数はいくつですか?
S4-3-1751KX はスプライン径 1.750" に 16 スプラインを備えています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。
S4-3-1751KX の在庫はありますか?
はい。フロリダ州に 1 点の在庫がございます。平日の東部標準時(EST)午後2時までのご注文の多くは、当日中に発送いたします。