4103-344 1410 Series Transmission Yoke

Part No. 4103-344 (also written 4103/344) Transmission Yokes, 1410 Series, 32/34 X 1.750 Splines, 2.300" Hub Dia

$115.19

In stock7 ready to ship

Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.

  • Free shipping on parts orders over $1,000
  • 14-day returns
  • Fitment help: (813) 524-6491

Specifications 4103-344 · 1410 Series Transmission Yoke

How to measurePoint at a letter to read its measurement
BADC
Part number
4103-344
Part type
Transmission Yoke
Condition
New
Series
1410
Counter bore diameter
0
Center u-joint to end
10.150
Hub diameter
2.300
Splines count diameter
32X34 | 1.750
Weight
7.37 lb

Fitment

FORD 5R110W

1410 series parts use 1.188" u-joint bearing caps on a 4.188" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.

Estimate shipping to your ZIP

Estimate shipping

Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.

Local pickup in Florida — free

About 4103-344

Part Number4103-344 Series1410 ApplicationFord 5R110W (TorqShift) Splines32/34 x 1.625" C/U-joint to End10.150" Hub Diameter2.300"

The Ford 5R110W TorqShift transmission is found in 2003-2010 Super Duty F-250 through F-550 trucks with the 6.0L and 6.4L Power Stroke diesel engines -- one of the highest-torque light-heavy truck transmissions used in that era. The 10.150" C/U-joint to end dimension is among the longest in the 1410 series lineup, reflecting the extended slip travel needed on long-wheelbase Super Duty trucks.

The 2.300" hub diameter is specific to the 5R110W tail housing output seal. Using a yoke with an incorrect hub diameter on this transmission will result in immediate fluid leakage that contaminates the driveshaft and differential. No counterbore is used -- the output shaft engagement centers the yoke. Cross-reference with Spicer 3-3-4381X for an OEM-matched alternative. Inspect the output shaft for scoring before installation.

Related Transmission Yokes in the 1410 series

See the full table

4103-344 questions

What series is 4103-344?

4103-344 is a 1410 series transmission yoke. Nominal 1410 dimensions are 1.188" bearing caps on a 4.188" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.

What spline count does 4103-344 have?

4103-344 is cut for 32X34 | 1.750 splines (count × major diameter). Count the splines on the output shaft and measure across the major diameter to confirm.

Is 4103-344 in stock?

Yes. 7 are in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.